Operation Manual

Remove screw 1.
Pull the glass out of the re-
flector housing at the threaded-
fastener side.
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
Use a clean, dry cloth to hold
the new bulb in order to
keep the glass free of foreign
matter.
Turn bulb 2 clockwise to install
it in the bulb housing.
Working from the inboard
side, insert the glass into the
bulb housing and close the
housing.
8
114
z Maintenance