Operation Manual

Make sure the motorcycle is
standing firmly.
Bulbs
Replacing low-beam and
high-beam headlight bulb
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove cover 1 for the high-
beam headlight or cover 2 for
the low-beam headlight.
Disconnect plug 3.
Disengage spring clips 4 from
the fastenings and swing them
aside.
Remove bulb 5.
Replace the defective bulb.
Bulb for high-beam
headlight
H7 / 12 V / 55 W
Bulbs for the low-beam
headlight
H7 / 12 V / 55 W
Hold the new bulb by the base
only, in order to keep the glass
free of foreign matter.
Install the bulb, making sure
that alignment is correct at po-
sition 6.
8
111
z Maintenance