Operation Manual

Seat left adjusting plate 7 in
the swinging arm and install
quick-release axle 6 in the
brake caliper and the rear
wheel.
Make sure that the axle fits
into the recess of the adjust-
ing plate.
Install right adjusting plate 5.
Install nut 2, but do not tighten
it at this point.
without centre stand
OE
Remove the auxiliary stand.
Insert the speed sensor into
the bore and install screw 1.
Adjust chain sag ( 101).
Front-wheel stand
Install the front-wheel
stand
The BMW Motorrad front
wheel stand is not designed
to support the motorcycle
without the assistance of an
auxiliary stand. A motorcycle
resting only on the front wheel
stand and the rear wheel can
topple.
8
109
z Maintenance