Operation Manual

The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the forks, making
sure that the brake disc passes
between the brake pads of the
brake caliper on the left.
Raise the front wheel, insert
axle 2 and tighten to specified
torque.
Quick-release axle, front,
in axle holder
30 Nm
Remove the front-wheel stand.
without centre stand
OE
Remove the auxiliary stand.
Ease the right brake caliper
onto the brake disc.
Tighten screws 2 to the spe-
cified tightening torque.
Brake caliper on tele-
scopic fork
38 Nm
Insert the ABS sensor into its
bore and install screw 1.
Remove the adhesive tape
from the wheel rim.
Operate the brake several
times until the brake pads are
bedded.
Firmly compress the front forks
several times.
8
106
z Maintenance