Operation Manual

Remove screw 1.
Pull the glass out of the re-
flector housing at the threaded-
fastener side.
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with LED turn indicators
OE
LED / 12 V
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Turn bulb 2 clockwise to install
it in the bulb housing.
Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
8
114
z Maintenance