Operation Manual

Replacing brake light and
rear light bulb
The LED rear light can be re-
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Replacing turn indicator
bulbs, front and rear
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screw 1.
Pull the glass out of the re-
flector housing at the threaded-
fastener side.
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with white turn indicators
OE
RY10W / 12 V / 10 W
with LED turn indicators
OA
LED / 12 V
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
with white turn indicators
OE
RY10W / 12 V / 10 W
with LED turn indicators
OA
LED / 12 V
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
8
107
z Maintenance