Operation Manual

When the engine is not
running you can switch on
the lights by switching on the ig-
nition and either switching on the
high-beam headlight or operating
the headlight flasher.
High-beam headlight and
headlight flasher
Press top section of switch 1
to switch on the high-beam
headlight.
Press bottom section of
switch 1 to operate the
headlight flasher.
Parking light
Switch off the ignition.
Immediately after switching off
the ignition, push button 1 and
hold it in this position until the
parking lights come on.
Switch the ignition on and off
again to switch off the parking
lights.
Turn indicators
Operating flashing turn
indicators
Switch on the ignition.
The turn indicators are can-
celled automatically after
you have ridden for approxim-
ately 10 seconds, or covered a
distance of about 200 m.
Press button 1 to switch on
the left flashing turn indicator.
4
50
z Operation