Operation Manual

Repeatedly press button 1 until
the reading shows the mode
you want.
ON: Redline warning activated.
OFF: Redline warning deactiv-
ated.
To save the setting, press
button 1 and button 2 at
the same time and hold
them down until the reading
changes.
Tyre pressure
monitoring
(ReifenDruck-Control)
RDC
with tyre pressure monitoring
(RDC)
OE
Viewing tyre-pressure
readings
Switch on the ignition.
Repeatedly press button 2 un-
til the tyre-pressure readings
appear on the display.
Tyre-pressure readings 3 are
based on a reference tyre tem-
perature of 20 °C. The front tyre
pressure is on the left; the read-
ing on the right is the rear tyre
pressure. -- -- appears dir-
ectly after the ignition is switched
on, because the sensors do not
transmit tyre pressures until the
first time the motorcycle acceler-
ates to more than 30 km/h.
Lights
Side light
The side lights switch on auto-
matically when the ignition is
switched on.
The side lights place
a strain on the battery.
Do not switch the ignition
on for longer than absolutely
necessary.
Low-beam headlight
The low-beam headlight switches
on automatically when you start
the engine.
4
49
z Operation