Operation Manual

Align the two adapters 2 so
that the front forks are securely
seated.
Tighten adjusting screws 1.
Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.
with centre stand
OE
If the motorcycle is raised
too far the centre stand will
lift clear of the ground and the
motorcycle could topple to one
side.
When raising the motorcycle,
make sure that the centre stand
remains on the ground. If ne-
cessary, adjust the height of the
front-wheel stand.
Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.
Bulbs
General instructions
A warning appears in the multi-
function display if a bulb is de-
fective.
A defective bulb places
your safety at risk because
it is easier for other users to
oversee the motorcycle.
Replace defective bulbs as
soon as possible; always carry a
complete set of spare bulbs if
possible.
The bulb is pressurised and
can cause injury if dam-
aged.
Wear protective goggles and
gloves when changing bulbs.
8
109
z Maintenance