Operation Manual

At the same time, the following
warning lights and telltale lights
are switched on in succession:
Telltale light for high-beam
headlight and left turn indicator
telltale light
General warning light, showing
yellow, and neutral telltale light
Warning light for fuel down to
reserve and right turn indicator
telltale light
Warning light for oil pressure
with BMW Motorrad ABS
OE
ABS warning light
Phase 2
General warning light
changes from yellow to red.
Phase 3
The rev. counter and speedo-
meter needles both swing back
to rest. At the same time, all the
warning lights and telltale lights
switched on in the initial phase
are switched off in reverse se-
quence.
If a needle did not move or if a
warning light or telltale light did
not show as specified above:
Some malfunctions cannot
be indicated if one of the
warning lights fails to show.
Make sure that all the warning
and telltale lights come on in the
pre-ride check.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ABS self-diagnosis
OE
BMW Motorrad ABS performs
self-diagnosis to ensure its op-
erability. Self-diagnosis is per-
formed automatically when you
switch on the ignition. The mo-
torcycle has to move forward a
few metres for the wheel sensors
to be tested.
Phase 1
Test of the diagnosis-compat-
ible system components with
the motorcycle at a standstill.
ABS warning light flashes.
Possible national variant of
the ABS warning light.
Phase 2
Test of the wheel sensors as
the motorcycle pulls away from
rest.
ABS warning light flashes.
Possible national variant of
the ABS warning light.
ABS self-diagnosis
completed
The ABS warning light goes
out.
5
66
z Riding