Operation Manual

Stow on-board toolkit 1.
Install the seat ( 60)
Damping
Damping
Damping must be adapted to suit
the surface on which the motor-
cycle is ridden and to suit spring
preload.
An uneven surface requires
softer damping than a smooth
surface.
An increase in spring preload
requires firmer damping, a re-
duction in spring preload re-
quires softer damping.
Adjusting damping for
rear wheel
You adjust the damping char-
acteristic by turning adjusting
screw 1.
If you want to increase damp-
ing, turn adjusting screw 1
clockwise.
If you want to reduce damping,
turn adjusting screw 1 counter-
clockwise.
Basic setting of rear-sus-
pension damping charac-
teristic
Turn adjusting screw as far
as it will go clockwise, then
back it off 2 turns. (Full load
of fuel, with rider 85 kg)
4
57
z Operation