Operation Manual

Redline warning
The redline warning indicates
that engine revolutions have
reached the rev. counter's red
segment. The anti-theft alarm
telltale light 1 flashes red to in-
dicate that the engine is red-
lining.
The signal remains active un-
til you shift up or reduce engine
speed. You can activate or deac-
tivate the redline warning.
Activating redline warning
Press button 1 and button 2
at the same time and hold
them down until the reading
changes.
FLASH (redline warning) ap-
pears, along with
ON or OFF.
Repeatedly press button 1 until
the reading shows the mode
you want.
ON: Redline warning activated.
OFF: Redline warning deactiv-
ated.
To confirm the setting, press
button 1 and button 2 at
the same time and hold
them down until the reading
changes.
The settings are accepted and
the display returns to its most
recent reading.
The most recent setting is re-
tained if you do not confirm the
new settings.
Tyre pressure
monitoring
(ReifenDruck-Control)
RDC
OE
Selecting RDC readings
Switch on the ignition.
4
48
z Operation