Operation Manual

Press button 2 while the stop-
watch is stopped.
The stopwatch begins timing
in tenths of a second from the
time originally shown.
Press button 2 while the stop-
watch is running.
The stopwatch shows the
stopped time.
Press and hold down button 2.
The stopwatch is reset and
shows
0.00.00.0.
Using stopwatch as Lap-
Timer
Press button 1 and button 2
at the same time and hold
them down until the reading
changes.
FLASH (redline warning) ap-
pears, along with
ON or OFF.
Press button 2.
LAP (Lap-Timer) appears,
along with
ON or OFF.
Repeatedly press button 1 until
the reading shows the mode
you want.
ON: Stopwatch operated by
means of the INFO button on
the handlebar fitting.
OFF: Stopwatch operated by
means of button 2 in the in-
strument cluster.
To confirm the setting, press
button 1 and button 2 at
the same time and hold
them down until the reading
changes.
The settings are accepted and
the display returns to its most
recent reading.
The most recent setting is re-
tained if you do not confirm the
new settings.
4
47
z Operation