Operation Manual

shown as soon as the fuel level
can be measured exactly.
When refuelling after running on
reserve, make sure that you top
up the tank to a level above re-
serve, as otherwise the sensor
will not be able to register the
new level. If the sensor cannot
register the new level neither the
fuel-level reading nor the range
readout can be updated.
The calculated range is only
an approximate reading.
Consequently, BMW Motorrad
recommends that you should not
try to use the full range before
refuelling.
Stopwatch
You can switch from the odo-
meter reading to a stopwatch.
The readout is in hours, minutes,
seconds and tenths of a second,
with dots as separators.
If you want to use the stopwatch
as a lap timer, you can operate
it by means of the INFO button
on the handlebar fitting instead
of using button 2. If you set the
controls so that the stopwatch is
operated by means of the INFO
button, you must use button 2 to
operate the on-board computer.
The stopwatch continues to time
in the background if you switch
back temporarily to the odometer
reading. Similarly, the stopwatch
continues timing if you temporar-
ily switch off the ignition.
Operating stopwatch
If necessary, use button 1 to
switch from the odometer to
the stopwatch.
4
46
z Operation