Operation Manual

Seat left adjusting plate 7 in
the swinging arm and install
quick-release axle 6 in the
brake caliper and the rear
wheel.
Make sure that the axle fits in-
to the recess of the adjusting
plate.
Install right adjusting plate 5.
Install nut 2, but do not tighten
it at this point.
Seat the speed sensor in the
holder and install screw 1 of
the speed sensor.
Adjust the chain tension
( 100)
Remove the auxiliary stand, if
installed beforehand.
Front-wheel stand
Installing front wheel
stand
The BMW Motorrad front
wheel stand is not designed
to support the motorcycle
without the assistance of an
auxiliary stand. A motorcycle
8
106
z Maintenance