Specifications

Version 31.01.2013 USB-E65
Page3
1.2. Check compatibility of vehicle and accessories
1.3. Setting the dip switches of the CAN-box TV-436
1.4. Setting the dip switches of the USB-box USBC-M536
The default dip switch settings of the USB-box
need to be changed ONLY if a rear-view camera is
or shall be connected or if the AV-input of the
usbLOGiC shall be deactivated. The dip switches are
located inside the USB-box. For changes it is
necessary to open the box. Default settings are:
dip1 = ON, dip2 = OFF, dip3 = ON
Requirements
Vehicle 7series (E65/E66)
Navigation Navigation system Professional E65 (older 1/2-button iDrive
or CIC (newer 8-button iDrive) with 8.8” monitor
Limitations
factory-TV-tuner Must NOT be installed. If uninstalled, optical ring must be closed.
factory DVD-changer After-market rear-view camera cannot be connected to
or factory nightvision the usbLOGiC interface.
factory Additional interface VL-RGB02-R is necessary
rear-seat-entertainment
After-market rear-view cam Only works from usbLOGiC mode, not from OEM.
USB-port Only for media which work with power supply by ONE single USB
connector
Factory PDC If an after-market rear-view camera should be connected by the
usbLOGiC the visual PDC display must be deactivated
occasionally or permanently for camera picture.
All vehicles dip 1 ON, dip 2 OFF, dip 3 OFF