Operation Manual

When is it necessary to
synchronise the remote
control?
The remote control has to be
synchronised if the buttons of
the remote control have been
pressed more than 256 times
outside the receiver's range.
Once this limit has been reached,
the receiver on the vehicle will no
longer react to the signals from
the remote control.
Synchronising remote
control
Press and hold down button 1
and button 2.
LED flashes for ten seconds.
As soon as the LED goes out,
release button 1 and button 2.
LED lights up.
Press button 1 or button 2.
LED goes out.
Remote control has been syn-
chronised.
Battery
with anti-theft alarm (DWA)
OE
When does the battery
have to be changed?
The battery in the remote control
is due to be changed after ap-
proximately 2 - 3 years. You can
tell that the battery is weak if the
LED does not light up or lights
up only briefly when a button is
pressed.
Changing battery
Remove screw 2 and remove
bottom part of housing 1.
5
61
z Anti-theft alarm DWA