Operation Manual

The fuse assignments and
fuse amperage ratings spe-
cified for your motorcycle are lis-
ted in the section entitled "Tech-
nical data". The figures in the
graphic correspond to the fuse
numbers.
Close the fuse cover.
The latch engages with an
audible click.
Installing side panel ( 113).
Lighting
Replacing bulbs for low-
beam headlight and high-
beam headlight
Make sure the ground is level
and firm and place the Maxi-
Scooter on its stand.
Switch off the ignition.
Remove the right side panel to
replace the bulb for the low-
beam headlight.
Remove the left side panel to
replace the bulb for the high-
beam headlight.
Remove cover 1 to replace
the bulb for the high-beam
headlight; remove cover 2 to
replace the bulb for the low-
beam headlight.
Disconnect plug 3.
Disengage spring clip 4 from
the latches and swing it up.
Remove bulb 5.
9
106
z Maintenance