Operation Manual

Remove the adhesive tape
from the wheel rim.
Firmly pull the handbrake lever
until the pressure point is per-
ceptible, and repeat this opera-
tion several times.
Hold the front-wheel cover in
position and install screws 1
and 2 on left and right.
Remove the rear wheel
Make sure the ground is level
and firm and place the Maxi-
Scooter on its centre stand.
Risk of burns caused by the
hot exhaust system.
Do not touch the exhaust system
when it is hot; if necessary, allow
the exhaust system ample time
to cool before proceeding.
Remove screws 1.
Remove screw 2 and remove
the cover.
Remove screw 3, counter-
holding the nut on the back.
Slacken screw 4.
9
101
z Maintenance