Technical information

.
8. Disconnect high-voltage connector
.
9. Measure the de-energised state at the high-voltage connector
The disconnected high-voltage cable is directly linked to high-voltage battery.
It is essential that the contacts are reached with the gauge tips when measuring.
In the next step, measurements can be taken from each of the contacts to the housing of the high-voltage battery. The
- Remove "HV interlock" (1)
- Pull out lock (2) in direction of arrow up to limit position
- Pull off high-voltage connector (3)
Page
54
of
66
<!
----
>
2/24/2015
file://C:\Users\QX54891\AppData\Local\Temp\14\DW_Temp_QX54891\VUL
-
REL
-
BM
...