Technical information

Installation position of high-voltage battery behind the rear seat bench
.
The high-voltage system is to be switched off by removing the small pole connector (HV interlock) (see chapter 3.1.2
point 8).
.
3.1.2 Determine voltage free status
A switched off high-voltage system can be identified via the Check Control message "High-voltage system deactivated" in
the instrument cluster.
Page
50
of
66
<!
----
>
2/24/2015
file://C:\Users\QX54891\AppData\Local\Temp\14\DW_Temp_QX54891\VUL
-
REL
-
BM
...