User's Manual

BMS ENTERPRISES A Division of 1066259 Ontario Limited
Every speed setting will have 2 times light flashes on remote and the product at the
same time then light goes off.
4） Incremental Speed.
Press and hold the big button any time while its in standby mode or it is vibrating
it will ALWAYS start to increase the speed from lowest settings (20%) to highest
setting (100%). The whole speed increase is about 7 seconds.
When the user releases the button, it will keep the vibration at the released power
stage, and light will go out.
While the speed is increasing, the light on the product and big button light on remote
will quick flashes.
When the user quick press the button again when it is incremental speed mode, it will
go back to the last function settings. Light flashes 2times on both of the remote and
product then goes out.
5） Turn into standby mode.
Quick press the power button on the remote while the product is working (either in
incremental or 7 settings) will turn the product into standby mode.
There will be 2 times light flash on both of the remote’s power light and product as
confirmation and light goes out on remote but keeps on the product.
1) Turn OFF.
Press and hold the power button on the remote while the product is working (either
in incremental or 7 settings) will turn the product into OFF mode.
There will be 2 times light flash on both of the remote’s power light and product as