Product Manual

The indicators below are also available only
for TrailSafe+ when used with SwayControl
Battery good for 15mins operation and SwayControl in normal operation
Sway event active
Battery may have insufficient capacity
for 15 mins of braking operation or
SwayControl not detected
1. Check battery to ensure over 10Ah
battery capacity available.
2. Check if SwayControl is still connected.
No power to SwayControl after
‘wake-up’ from brake controller
Check quality of power, ground and brake
controller wire connections. Check for any
blown fuses on the tow vehicle and trailer
House battery overvoltage(> 20V)
or undervoltage ( < 3V) on SwayControl
Check power source voltage, correct
voltage is 12-15V
CONDITIONSTATUS SOLUTION
Off-road mode SwayControl disabled momentarily; Unit
will return to normal operation when not
on rough terrain
SwayControl system malfunction Service centre repair required
SwayControl sensor malfunction -
No SwayControl of trailer
Service centre repair required
Left side brake short Repair short in left side brake wiring
Right side brake short Repair short in right side brake wiring
SwayControl in ‘sleep’ mode or
TrailSafe+ standby or no power
Activate manual override on the brake
controller to “wake-up” unit
8