OWNER’S MANUAL RVView2 TEAMBMPRO.
POWERING YOUR ADVENTURES With over 50 years’ experience in power solutions combined with manufacturing and design facilities in Melbourne, Australia, BMPRO are the leading experts in RV power and control management. Inspired by the great outdoors, we have created a range of rugged, smart and reliable products to power your adventures.
SAFETY PRECAUTIONS Please read the Safety Precautions before installing or using the RVView2. Be sure to observe all precautions without fail. Failure to observe these instructions properly may result in personal damage, or personal injury which depending on the circumstances may be serious and cause loss of life. Correct installation is the most critical factor in ensuring the safe use of the RVView2. If every consideration of these instructions has been satisfied, the RVView will be safe to operate.
CONTENTS SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . 4 ABOUT THE RVVIEW 2 . . . . . . . . . . . . . . . . . . 8 DESCRIPTION OF PARTS . . . . . . . . . . . . . . . . . 9 POWER INFORMATION SCREEN . . . . . . . . . . . . . . 9 WATER TANKS SCREEN . . . . . . . . . . . . . . . . . 11 RVVIEW2 WIRING DIAGRAM . . . . . . . . . . . . . . . 12 USING YOUR RVVIEW2 . . . . .
ABOUT THE RVVIEW2 The RVView2 is a wall-mounted 12V battery monitor, designed specifically to operate with BMPRO’s BatteryPlus35-II series (BatteryPlus35-II-SI, BatteryPlus35-II-SR, BatteryPlus35-II-HA). The RVView2 provides vital data at a glance including caravan battery voltage and charging/discharging current.
DESCRIPTION OF PARTS POWER INFORMATION SCREEN 2 3 4 1 5 7 6 Figure 2: The power information screen on the RVView2 Monitor q WARNING INDICATOR Indicating an issue, the RVView2 will display a warning if: • There is a fault with one (or more) of the loads connected to the BatteryPlus35-II, for example, a short or overload fault. • BMPRO’s BC300 + CommLink has been installed and communication with the BC300 is lost.
e BATTERY STATUS INDICATOR Displays the status of the caravan battery connected to the BatteryPlus35-II. BATTERY IS IDLE BATTERY IS IDLE BUT BP35 IS CHARGING CONNECTED BATTERY AND 100% CHARGED IS NOT 100% CHARGED THE BATTERY IS DISCHARGING Figure 4: RVView battery status indications The charging indicator will only appear if the positive current to the battery is 1.0A or higher. r SYSTEM VOLTAGE Displays the system voltage.
WATER TANKS SCREEN 1 2 Figure 5: The water tanks screen on the RVView Monitor q TANKS Displays the current water levels of up to 4 connected water tanks. The water levels shown on the tanks are divided into 4 segments. If a tank shows 1 segment, the tank is either disconnected, empty or is up to onequarter full. w BACKLIGHT/SCREEN CHANGE BUTTON Press the backlight/screen change button to turn the backlight of the RVView2 screen on.
CAN CABLE CAN CABLE CAN BUS OPTIONAL EXTRAS RVVIEW2 WIRING DIAGRAM 12
USING YOUR RVVIEW2 The RVView2 is designed to work with the BatteryPlus35-II to display important information on your water tank status and 12V power system, including your battery. The RVView2 does not have an ON/OFF button. The RVView2 receives power directly from the BatteryPlus35-II through the connected data cable. The RVView2 will automatically turn off if it is not receiving power from the BatteryPlus35-II.
FAQS AND TROUBLESHOOTING Need more help troubleshooting your RVView2? Refer to our website for more information at teambmpro.com/technical-support Why has the RVView2 screen turned off? The RVView2 receives power to run the monitor from the BatteryPlus35-II. If the BatteryPlus35-II shuts power to the monitor, the RVView2 screen will turn off. The BatteryPlus35-II will shut power to the RVView2 if: 1. The user activated the remote switch connected to the BatteryPlus35-II.
SPECIFICATIONS RVView2 Visual Warning Indicator displayed if BatteryPlus35-II short-circuit is detected Water Monitoring Dipper or tank bungs Monitored Battery Capacity 50-600Ah Input Voltage Range 6-16V Battery Drain < 22mA with backlight off Ambient Temperature 0-50°C Dimensions (mm) 140W x 80H x 15.
COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Any changes or modifications not expressly approved by BMPRO could void the user’s authority to operate this equipment.
WARRANTY TERMS AND CONDITIONS (AUSTRALIA) Registering your BMPRO product is an important step to ensure that you receive all of the benefits you are entitled to. Please visit www.teambmpro.com to complete the online registration form for your new product today. 1. BMPRO goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for major failure and for compensation for any reasonably foreseeable loss or damage.
LIMITED WARRANTY TERMS AND CONDITIONS (USA) Registering your BMPRO product is an important step to ensure that you receive all the benefits you are entitled to. Please visit teambmpro.com to complete the online registration form for your new product today. What this Limited Warranty Covers This warranty covers any defect or malfunction in your BMPRO product. Under this warranty you are entitled to have such goods replaced, repaired or refunded.
POWERING YOUR ADVENTURES. TEAM BMPRO .COM BMPRO sales@teambmpro.com 19 Henderson Rd, Knoxfield VIC 3180 Australia | Unit 1, 821 E Windsor Ave, Elkhart IN 46514 USA teambmpro.
