Product Manual
31
Carefully lift the board
with the electronics.
Replace the CR2032
battery.
Place the lid back into base
and press down fully to re-
engage all 4 snap fits.
Using a small
screwdriver, lift
the lid which is
held by the snap
fit.
Replacing SmartSense Sensor Batteries
REPLACING SMARTSENSE SENSOR BATTERIES
SmartSense sensor batteries can be replaced by following the below
instructions:
REPLACING SMARTTEMP SENSOR BATTERIES
SmartTemp sensor batteries can be replaced by following the below
instructions:
Carefully lift
the board with
the electronics.
Replace the
CR2477 battery.
Using a small
screwdriver, lift
the lid from the
recess side.
Align the button on the PCB
with the button on the base
of sensor. Press the base
down until it is locked.
Align the groove in
the PCB with two
pieces of plastic.
Replacing SmartTemp Sensor Batteries