Product Manual

25
5. Press Add Sensor.
6. A pop-up will appear with pairing instructions.
7. Press OK.
8. If this is the firs time this sensor has been synced, press the orange sync
button on the SmartSense sensor 6 times. This permanently disables Sleep
Mode, which is the factory setting. After the first use, only a single press is
required to sync the sensor.
9. Once pairing is successful, the sensor, level of gas and battery level of the
sensor will appear on the Home screen.
WARNING
Once the SmartSense sensor is synced to the ProSmart, the sensor will operate
continually until the battery is removed or changed. There is no “power off” mode.
Once operational, the sensor may be moved, repositioned, or removed as needed,
without any special instruction or changes to the sensor.