Product Manual

10
DESCRIPTION OF PARTS
SMARTLINK
1. DIP SWITCH
Used to configure the ports on the SmartLink. Leave in the “ON” position.
2. DISPLAY PORT (UNUSED)
3. CAN BUS PORT (UNUSED)
4. WATER TANK SENSOR CONNECTIONS
Used to connect water sensors, such as BMPRO Dippers.
5. PRODUCT PAGE QR CODE
Scan the QR code to view information about ProSmart, including FAQs and the
manual at teambmpro.com
6. SERIAL NUMBER
Contains the passkey pin required when pairing the SmartLink to the ProSmart
App.
7. ANTENNA
Used to receive signals from SmartConnect sensors and transmit to your mobile
devices.
The antenna can be swivelled for increased signal performance.
8 7 6
9
10
11
3
4
5
21