Product Manual

16
Figure 4: Recommended wiring for connecting batteries in parallel.
MAINS CABLE
The J35 is pre-cabled and fitted with a mains plug. Ensure that the connections
to the mains supply are in accordance with the national wiring rules, and that the
earth connection is installed.
The plug must be accessible during installation. If it is not possible, an accessible
mains disconnection switch must be incorporated in the mains wiring where the
plug is connected.
CONNECTING MULTIPLE BATTERIES
Before connecting multiple batteries in parallel to the J35, check that all batteries
are:
1. Of the same type, for example, deep cycle AGM battery
2. Of the same capacity, for example, 100Ah
3. By the same manufacturer
4. Fully charged
5. Of the same age-never use batteries that differ in age
The recommended wiring for connecting multiple batteries in parallel to the J35 is
given in Figure 4. Depending on system requirements, a qualified auto-electrician
may wire the batteries differently.