Product Manual

FAQS AND TROUBLESHOOTING
Need more help troubleshooting your MiniBoostPRO?
Contact our customer service team online at at teambmpro.com/technical-
support
Can I use the MiniBoostPRO inside my engine bay?
The MiniBoostPRO cannot be used inside an engine bay as it is rated to IP20.
Does the MiniBoostPRO connect to home solar panels?
No, the MiniBoostPRO will not connect if the voltage rating of your home
solar panels is over 25V.
Can I run my appliances directly from MiniBoostPRO without any battery being
connected to it?
The MiniBoostPRO works only when the battery is connected to the output.
You can connect your appliances to MiniBoostPRO, but the secondary
battery will have to be connected at the same time.
Can I cut MiniBoostPRO leads shorter for practical wiring?
This is not recommended as this could degrade the MiniBoostPRO’s
functionality. Refer to recommendation of a service centre.
Is the MiniBoostPRO housing electrically isolated?
No, as this is due to the MiniBoostPRO’s housing being physically and
electrically connected to the negative terminal. Always be cautious of
accidental connections from the housing to the battery positive terminal.
At what point will the MiniBoostPRO begin solar charging?
If the battery just been connected, the battery will begin charging from solar.
If the battery was fully charged to the float stage, it will restart solar
charging once the voltage drops below 13V.
21