Product Manual

SAFETY PRECAUTIONS
Failure to observe these instructions properly may result in property
damage or personal injury, which may be serious depending on the
circumstances.
Correct installation is the most critical factor in ensuring the safe use of the power supply.
If every consideration of these instructions has been satisfied the power supply will be safe
to operate.
Take care as dropping or touching of metal objects onto the battery terminals may cause
short circuits. Remove any personal metal adornment such as a chain, watch or ring, which
could cause short circuits and personal injury.
Batteries are electrically live at all times and must be treated with extreme caution. They can
supply high short circuit currents, even if they appear damaged or undamaged.
Do not drop or shake the product vigorously as this may cause damage to the product. Do
not shock the equipment, batteries and charger, as this may cause device or battery failure,
fire or explosion.
Keep the BC300 External Shunt and CommLink dry; do not expose it to water. Do not use
it where it can fall into water (such as near a pool, pond, bath etc.). Do not let the device,
battery or charger come into contact with water vapour or operate it with wet hands. Contact
with water will cause the device to short-circuit, corrode or cause electric shock.
Do not use this product where it is excessively hot, cold, dusty or humid, or where it is
exposed to strong magnetic fields or long periods of sunshine. Such exposure may cause
device or battery failure, fire or explosion.
Only use the device with the cable supplied. Use of other accessories not recommended in
this manual may cause damage to the unit and will void the warranty.
Clean the housing of the device lightly with a dry or moist cotton cloth if required. Do not use
alcohol, thinners, benzene or any other chemical cleaner.
This device is a high precision electronic product. It contains no user-serviceable parts
inside. Do not try to dismantle, modify or repair it yourself. Disassembly by unauthorised
persons will void the warranty.
Specifications are subject to change and improvement without notice.
CAUTION
Please read the Safety Precautions carefully before installing the power supply.
Be sure to observe all precautions without fail.
After completing the installation, conduct a trial operation to check for faults.