Product Manual

Retrofitting
ControlNode103
ɋ Unplug existing ControlNode102 from the J35 Power Management System
ɋ Plug new ControlNode103 into J35 Power Management System
ɋ At the bottom of the JHub screen, you will see triangle, circle and square symbols.
ɋ
ɋ Press the suare symbol. The screen size will appear smaller. Then press the clear all in
the top right corner. This will close the app and you will see the home screen of the car
and caravan.
ɋ On the right-hand side of the home screen you will see either a gear cog or a white circle
with 6 white dots in it, this is Settings menu. Please click on this to open
ɋ Select Apps & Notifications
ɋ Select JHub app
ɋ Select Storage
ɋ Select Clear Data
ɋ Select OK
ɋ Then in the left-hand top corner, tap the back arrow ← once.
ɋ Select permissions.
ɋ Turn off Locations, then turn back on.
ɋ Return to Home Screen (Touch the square symbol at the bottom of the tablet, then press
clear all in the top right of the minimised screen)
ɋ On the home screen Select JHub App
ɋ Once the app is open, it will ask you to ‘Allow Locations’ Select Allow
ɋ Connection options will appear ‘Scan or Close’ - click Scan
ɋ While App is scanning you have 30sec to pair device with ControlNode103
ɋ On the left-hand side of the ControlNode103, there is a small black round button. Press
the black button to side of node withing 30sec scanning time
ɋ A CN**** number appear ControlNode103 on the app. Select the CN**** number
ɋ Allow App to sync
ɋ App will now be synced and ready for use
Retrofitting ControlNode103 for SmartConnect compatibility. ControlNode103 only works with
BMPRO J35 power management systems with the revision number 10 (2019) or above.
HARDWARE
SOFTWARE