A OWNER’S MANUAL Brand BatteryCharge7.5 www.teambmpro.
Manual Part #030529 The BMPRO BatteryCharge7.5 (BC7.5) is designed by Setec, one of Australia’s leading power solutions experts. The BatteryCharge7.5 represents a high quality product that will provide years of service. Copyright © Setec 2017 Disclaimer SETEC accepts no liability for any loss or damage, which may occur as a result of improper or unsafe use of its products. Warranty is only valid if the unit has not been modified or misused by the customer.
CONTENTS What’s Included 4 Features 4 Cleaning and Maintenance 4 Safety Precautions 5 LCD Display 6 Specifications 7 Operation 8 Connection 8 Disconnection 8 Memory Function Reset 8 Select Charging Mode 8 Special Features 9 Overheating Protection 9 Trickle Charging 9 Product Features 10 Warranty Terms and Conditions 11 3
WHAT’S INCLUDED Owner’s Manual FEATURES The BatteryCharge7.5 (BC7.5) is an automatic battery charger with ten charge states. The BatteryCharge7.5 is suitable for the charging and maintenance of compatible 12V and 24V Lead Acid Batteries (AGM, Gel, Calcium, Wet) as well as LiFePO4 Lithium batteries: • 12 V: with a capacity of 18 - 240 Ah • 24 V: with a capacity of 10 - 120 Ah • Lithium (12.8V LiFePO4): with a capacity of 10 - 80 Ah The BatteryCharge7.
SAFETY PRECAUTIONS Please read the Safety Precautions carefully before using this battery charger. Be sure to observe all the safety precautions. WARNING Failure to follow these instructions properly may result in personal injury or loss of life. Ensure that there is good ventilation in the battery area.
LCD DISPLAY SMPS 13.6V SMPS 13.6V MODE LITHIUM 12.8V LITHIUM 12.8V RECOVER ADVANCED AGM 12V 12V RECOVER ADVANCED AGM 12V 12V “MODE” Selection button This mode is for charging small 24V Lead-acid batteries This mode is for charging 12V Lead-acid batteries Cold mode. For use when the battery temperature is below 5C. ADVANCED AGM 12V RECOVER 12V SMPS 13.6V LITHIUM 12.8V This mode is for charging 12V AGM batteries For attempting to recover 12V batteries that won’t charge For use as a 13.
SPECIFICATIONS Input voltage 220 - 240 V ~ 50 Hz 1.3A Power consumption 120 W Reverse current* < 10 mA (no AC input) Nominal output voltage 12 V DC / 24 V DC / 12.8V DC/ 13.6V DC Nominal output current 7.5 A / 3.75 A / 5.0A / 5.0 A Charging voltage 14.5V / 14.7V for 12V battery, 29 V / 29.4V for 24V battery, 14.5V for Lithium (12.8V LiFePO4), 13.6V for Switch Mode Power Supply. Charging current 7.5 A ± 10 %, 3.75 A ± 10 %, 5.
OPERATION CAUTION Before installing or re-connecting the BatteryCharge7.5 always ensure that the mains plug is disconnected from the mains socket. Battery Connection To connect the BatteryCharge7.5 to a battery, follow these instructions: Attach the (+) quick-release clamp (red) to the (+) terminal of the battery. Attach the (–) quick-release clamp (black) to the (–) terminal of the battery. Connect the mains lead of the BatteryCharge7.5 to an electrical power outlet socket.
Long press 3sec. the MODE selection button at no battery connected status after doing so, the corresponding LCD display SMPS 13.6V lights up. If you do not activate another process afterwards, the electronic system will automatically start the power supply output process as adaptor function together with the LCD display the output is 13.6V DC 5.0A. MODE SPECIAL FEATURES Overheating protection If the BatteryCharge7.5 becomes overheated during charging, the power output is automatically reduced.
PRODUCT FEATURES This appliance has been designed for charging a variety sealed lead acid batteries, as mainly used in cars, motorbikes and other vehicles. They may be of types e.g. WET (with liquid electrolyte), GEL (with mit gel-type electrolyte) or AGM (absorbed glass mat) batteries. A special design of the appliance (also named “ten-phase-charging strategy“) enables the recharging of the battery to almost 100 % of its original capacity.
WARRANTY TERMS AND CONDITIONS Registering your BMPRO by Setec product is an important step to ensure that you receive all of the benefits you are entitled to. Please visit www.teambmpro.com to complete the online registration form for your new product today. BMPRO by Setec goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for major failure and for compensation for any reasonably foreseeable loss or damage.
SWITCH OFF. POWER UP. BMPRO A Setec Brand +61 3 9763 0962 | sales@teambmpro.com 19 Henderson Rd, Knoxfield VIC 3180 Australia www.teambmpro.
