A OWNER’S MANUAL Brand BatteryCharge4 www.teambmpro.
Manual Part #030527 The BMPRO BatteryCharge4 (BC4) is designed by Setec, one of Australia’s leading power solutions experts. The BatteryCharge4 represents a high quality product that will provide years of service. Copyright © Setec 2017 Disclaimer SETEC accepts no liability for any loss or damage, which may occur as a result of improper or unsafe use of its products. Warranty is only valid if the unit has not been modified or misused by the customer.
CONTENTS What’s Included 4 Features 4 Cleaning and Maintenance 4 Safety Precautions 5 LCD Display 6 Specifications 7 Operation 8 Connection 8 Disconnection 8 Memory Function Reset 8 Select Charging Mode 8 Special Features 9 Overheating Protection 9 Trickle Charging 9 Charging 9 Warranty Terms and Conditions 10 3
WHAT’S INCLUDED Owner’s Manual FEATURES The BatteryCharge4 (BC4) is an automatic battery charger with eight charge states. The BatteryCharge4 is suitable for the charging and maintenance of compatible 6V and 12V Lead Acid Batteries (AGM, Gel, Calcium, Wet) as well as LiFePO4 Lithium batteries: • 6 V: with a capacity of 12 - 120 Ah • 12 V: with a capacity of 1.2 - 12 Ah • 12 V: with a capacity of 12 - 120 Ah • Lithium (12.
SAFETY PRECAUTIONS Please read the Safety Precautions carefully before using this battery charger. Be sure to observe all the safety precautions. WARNING Failure to follow these instructions properly may result in personal injury or loss of life. Ensure that there is good ventilation in the battery area.
LCD DISPLAY LITHIUM 12.8V LITHIUM 12.8V MODE RECOVER 12V RECOVER 12V “MODE” Selection button This mode is recommended for smaller 12V batteries up to 20Ah capacity. This mode is recommended for larger 12V batteries For 6V batteries only Cold mode. For use when the battery temperature is below 5C. LITHIUM 12.8V RECOVER 12V (12.8V 3.
SPECIFICATIONS Input voltage 220 - 240 V ~ 50 Hz 0.6A Power consumption 65 W Reverse current* < 10 mA (no AC input) Nominal output voltage 6 V DC / 12 V DC / 12.8V DC Nominal output current 0.9 A / 4.0 A / 3.0A Charging voltage 7.3 V / 7.4V for 6V battery, 14.5 V / 14.7V for 12V battery, 14.5V for Lithium (12.8V 4-cells LiFePO4). Charging current 0.9 A ± 10 %, 4.0 A ± 10 %, 3.0 A ± 10 % Battery type 6V/12V lead-acid battery 1.2Ah - 120Ah Lithium (12.
OPERATION CAUTION Before installing or re-connecting the BatteryCharge4 always ensure that the mains plug is disconnected from the mains socket. Battery Connection To connect the BatteryCharge4 to a battery, follow these instructions: Attach the (+) quick-release clamp (red) to the (+) terminal of the battery. Attach the (–) quick-release clamp (black) to the (–) terminal of the battery. Connect the mains lead of the BatteryCharge4 to an electrical power outlet socket.
SPECIAL FEATURES Overheating protection If the BatteryCharge4 becomes overheated during charging, the power output is automatically reduced. This protects against damaging both your battery and the charger. Trickle charging Once the battery has been fully charged, the BatteryCharge4 automatically changes to trickle charging. Depending on the measured voltage, the charging is interrupted or the battery is maintained in a fully charged condition with low voltage currents.
WARRANTY TERMS AND CONDITIONS Registering your BMPRO by Setec product is an important step to ensure that you receive all of the benefits you are entitled to. Please visit www.teambmpro.com to complete the online registration form for your new product today. BMPRO by Setec goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for major failure and for compensation for any reasonably foreseeable loss or damage.
SWITCH OFF. POWER UP. BMPRO A Setec Brand +61 3 9763 0962 | sales@teambmpro.com 19 Henderson Rd, Knoxfield VIC 3180 Australia www.teambmpro.
