Specifications

Approval sheet
Page 10 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018
Bending test
JIS C 0051- 7.4.1
The middle part of substrate shall be
pressurized by means of the pressurizing rod
at a rate of about 1 mm/s per second until the
deflection becomes 1mm/s and then pressure
shall be maintained for 51 sec.
Measurement to be made after keeping at
room temperature for 242 hours
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
Temperature cycle
JIS C 0025
1. 303 minutes at -40C3C,
2. 10~15 minutes at room temperature,
3. 303 minutes at +85C3C,
4. 10~15 minutes at room temperature,
Total 100 continuous cycles
Measurement to be made after keeping at
room temperature for 242 hrs
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
High temperature
JIS C 0021
*Temperature：85C2C
*Test duration：1000+24/-0 hours
Measurement to be made after keeping at
room temperature for 242 hrs
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
Humidity
(steady conditions)
JIS C 0022
*Humidity：90% to 95% R.H.
*Temperature：402C
*Time：1000+24/-0 hrs.
Measurement to be made after keeping
at room temperature for 242 hrs
※ 500hrs measuring the first data then
1000hrs data
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
Low temperature
JIS C 0020
*Temperature：-40C2C
*Test duration：1000+24/-0 hours
Measurement to be made after keeping at
room temperature for 242 hrs
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40
~ 85°C.
深圳市金航标电子有限公司