Quick Start
Appearance 1. Battery Indicator Green: Sufficient Battery Blinking green: Charging the battery Red: Low Battery Blinking Red: Device will power off soon. 2. Power Button Press and hold to turn your 4G Hotspot on or Off 3. Micro USB Port 4.
● ● Blue: Connect to 3G network Red: No Signal or sim card is not recognized, etc. 5. SMS Indicator ● Blinking Blue: Have Unread SMS 6. WiFi Indicator ● Blue: WiFi Signal is activite 7. Reset Button Press and hold to restore your 4G hotspot to its factory settings ☆ If you forget the user name, password or SSID for your 4G hotspot, try restoring the device to its factory setttings 8.
WiFi Connection The default SSID (WiFi network name) and WiFi network key are printed on the 4G
Hotspot Label We strongly recommend that you change the default SSID and WiFi key to keep your data secure ☆ You can manage your 4G hotspot through the Web Interface at http://192.168.0.1. The default username and password is admin. Click the online help on the web interface to learn more about your 4G Hotspot. ☆ After installation of driver, you can access to Web Interface http://192.168.0.
Please only use a charger that is compatible with your 4G Hotspot. The use of an incompatible charger may cause the device to malfunction, fail, or could even cause a fire. Such use voids all warranties, whether expressed or implied, on this product. ☆ The charger is an optional accessory. To buy a charger, please contact an authorized retailer. Connecting to the Internet Using an LTE, 3G, network The 4G Hotspot’s management parameters have been preset according to your operator’s requirements.
Logging into the Web Management page ☆ Make sure that the connection between the 4G Hopspot and the device used to access the Internet, is working normally. ☆ Open the browser on your device and enter http://192.168.0.1 in the address box. ☆ Enter your username and password to log into the web management page.
have any difficulty please contact customer care. Please note: The default username is admin The default password is admin Wi-Fi Sleep Mode (Battery Saving Mode) The Wi-Fi device has a mode that allows the device turn off automatically if there are no devices connected to the 4G Hotspot (via Wi-Fi or USB) for a period of time . This mode allows the device to go to “ Wi-Fi Sleep ” Mode to save battery life. The device can be switched back on by pressing the power button.
Restoring to Factory Settings If you forget the username, password, or SSID you have set, you can restore the settings on the web management page to the default factory settings. To do so, simply press and hold the RESET button until the 4G Hotspots restarts.
Changing SSID and password It is recommended that you change your 4G Hotspot’s SSID and password before you use it. The default SSID and password are printed on 4G Hotspot’s label, in the battery slot of the device. Enable SD card sharing * In HTTP Share Mode, the device only supports FAT/FAT32 file system. * HTTP Share Mode: Share SD card via web browser.
SD card via USB port will be disabled. * USB Access Only: By the removable drive mapping, user can access SD card *via USB cable only. The web page of sharing SD card will be disabled. * Path to Share: You can input the sharing path, such as /Picture. By typing only, a slash in Path to Share filed, you agree to share entire SD card. * Path to Share can't be a dot, and can't contain following characters: < > " ' & + / \: * | #?~`
SMS
Tips: ◇ ◇ ◇ ◇ Why isn’t my 4G Hotspot responding? Try restarting the device. If that doesn’t work, restore the device to its factory settings Why can’t I connect to my 4G Hotspot sometimes? To save Power, your 4G Hotspot’s WiFi auto off feature is designed to turn off WiFi when there haven’t been connections for a while. You can press the power button to turn on WiFi again.
◇ ◇ Why won’t my 4G Hotspot power on? Your battery is probably out of power. Charge your 4G Hotspot for a While and Power it back on. Why did my 4G Hotspot power off all of a sudden ? Your 4G Hotspot may overheat when you use it continuously over a long period of time, and thereby trigger its automated protection system. WiFi will be turn off and your 4G Hotspot will power off if this occurs. Please ensure the device is properly ventilated and cooled before you power it on again.
OS Compatability Report Operation System Support OS Windows 7 32/64-bit Yes OS Windows 8 32/64-bit Yes OS Windows 8.1 32/64-bit Yes OS Windows 10 32/64-bit Yes OS Windows 10.7 32/64-bit Yes OS Windows 10.8 32/64-bit Yes OS Windows 10.9 32/64-bit Yes OS Windows 10.10 32/64-bit Yes OS Windows 10.11 32/64-bit Yes The list is subject to change without prior notice.
FCC Statement 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.0cm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations.
may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
