Owner`s manual

Owner’s Manual
lüthner
e-Klavier
Owner’s Manual
Made in Germany
Page 11
lüthner
e
-Klavi
er 1
PRO-88
LAYER SOUNDS
Press 2 Sound Buttons together, the rst Sound Button you hold down will be the Main
Sound, which is louder than the secondary sound. You can use all Sounds on the Panel
to create a Layer- Sound set.
Example 1: Press and hold Guitar and String butons together = Guitar with Strings.
Example 2: Press and hold Strings then Guitar together = Strings with Guitar.
SPLIT SOUNDS
Press and Hold the two Sound buttons you would like to Split, i.e. Piano & Strings, and
select your Split Point on the Keyboard by pressing the Key where you would like the
split to begin. e rst sound selection pressed down in the pair will always be heard
to the right of the split.
EFX FUNCTION
With the EFX function, you can select special sound efects like Chorus, Flanger,
Tremolo, etc.
To adjust the EFX function:
Press the FUNCTION and EFX Buttons together to enter the EFX function. Select
the desired eect from the menu by using the Selection keys - / + to scroll the eects
library. To turn o an eects, press the FUNCTION button and the EFX button.
REVERB FUNCTION
With the Reverb function, you can set the amount of reverb for your sound selection.
To set reverb:
Press and hold the REV Button while editing the level of reverb with the Selection
keys - / + (the rst 2 Keys on the Keyboard: A 1= Minus, Bb1 = Plus). Release the
Reverb button and play.
To restore the default tuning:
Hold the REV button down while pressing both Selection keys - /+ together to restore
the keyboard to the default reverb level.