Quick Start Guide

SC12SP-V2 QUICK REFERENCE GUIDE
03
www.blustream.co.uk
Connections:
1 Power port – Use supplied 5V/1A DC adaptor
2 Power LED indicator - Lit when detecting unit is powered
3 L/R analogue audio input – 3.5mm stereo jack. To embed audio onto the HDMI output
4 HDMI input - Connect to a HDMI source device
5 HDMI LED indicator - Lit when there is an active HDMI connection to a source device
6 USB Update port - USB connector used for firmware upgrade
7 EDID dip-switches - Adjust the EDID setting for the source input - see following page for further details
Connections:
1 Mode dip-switches - Adjust the HDMI output resolution - see following page for further details
2 HDMI output 1 - Scaled video output. Connect to a HDMI display/end point
3 HDMI output 1 LED indicator - Lit when detecting an active HDMI connection to a display/end point
4 HDMI output 2 - Bypass video output. Connect to a HDMI display/end point
5 HDMI output 2 LED indicator - Lit when detecting an active HDMI connection to a display/end point
6 L/R analogue audio output – 3.5mm stereo jack. Please note: input must be PCM 2ch audio
7 Coaxial digital audio output – Extracted audio from HDMI input
Front Panel
Rear Panel
1 2 3 4 5 6 7
41 2 3 75 6
Input