User manual

Blusens Web:tv
21
ENGLISH
1. RF Antenna Input: RF signal input connection.
2. ETHERNET: Ethernet data connection 10/100.
3. HDMI: Video output connection for HDMI 1.3.
4. OPTICAL: Digital optical audio output.
5. COAXIAL: Digital coaxial audio output.
6. AV: Audio output and composite video connection.
7. POWER: Power input of the device.
8. USB: Rear USB 2.0 port.
9. ON/OFF: On / Off button (Web:TV is on when the LED is lit).
10. WPS: Wps wireless synchronization button.
11. R: Reset button.
12. IR: LED indicator of the remote control reception.
13. Standby: Standby LED indicator (Web:TV is on standby
when the LED is lit).
14. Wlan: Wireless status LED (Web:TV is connected when the
LED is lit).
15. Ethernet: Ethernet connection status LED (Web:TV is
connected when the LED is lit).
16. USB: Front USB 2.0 port.
17. High-speed 300 Mbit/sec WIFI/n antennas