User manual

- 26 -
USER MANUAL
Remarks: To authorize phone numbers for the buttons/inputs for receiving
location reports or SMS alarms or phone calls.
F=0, to turn off this function; (default)
F=1, only sends SMS to the authorized phone number;
F=2, only calls the authorized phone number;
F=3, both SMS and calling
P=1, set an authorized number for SOS button (Input 1)
P=2, set an authorized number for B button (Input 2)
P=3, set an authorized number for C button (Input 3)
T1: Preset phone number. Max.16 digits
If you need to set different numbers for receiving SMS and phone call, you
can then use W******,003,F,P,T1,T2, In this case T1 is the phone number for
receiving SMS and T2 for receiving phone call.
Low power alarm W******,004,X W000000,004,2
Remarks: When the tracker’s voltage is lower than the preset value, it will
send an SMS alarm to the authorized phone number for SOS.
X is the preset value of voltage.
=0, to turn off this function
=1, <3.3 V
=2, <3.4 V
=3, <3.5 V (default)
=4, <3.6 V
=5, <3.7 V
Overspeed alarm W******,005,XX W000000,005,08
Remarks: When the tracker speeds higher than the preset value, it will send
an SMS to the phone number for SOS.
XX is the preset value of speed and in 2 digits.
=00, to turn off this function
=[01, 20] (unit: 10Km/h)
In this example, when the tracker’s speed is over 80km/h, an SMS alarm
will be sent out.
Movement alarm W******,006,XX W000000,006,06