User manual

- 25 -
Blumax GPS Tracker V1.0
En
Annex 1. SMS Command List
Note: ****** is user’s password and the default password is 000000.
The tracker will only accept SMS-Commands from a user with the cor-
rect password. Commands with wrong password will be ignored.
Description SMS Command Example
Track on demand W******,000 W000000,000
Remarks: To get the current location of the tracker, send this SMS or make
a telephone call directly to the tracker and it will report its longitude and
latitude by SMS with format as follows:-
Latitude = 22 32 36.63N Longitude = 114 04 57.37E, Speed = 2.6854Km/h,
2008-12-24,01:50
Track on demand
-Google Link
W******,100 W000000,100
Remarks: Send this SMS-Command to the tracker and then you receive
an SMS with an http link. Click on the link then the location can be shown
directly on Google Map on your mobile phone. For example:
http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329&ie=UT
F8&z=16&iwloc=addr&om=1
(Note: Only smart phones and PDA support this function.)
Change password W******,001,###### W000000,001,123456
Remarks: To change user’s password. ###### is the new password. Pass-
word should be 6 digits.
Track by Interval W******,002,XXX W000000,002,030
Remarks: To set interval for automatic timed report.
XXX is the interval in minute. If XXX=000 to turn off tracking by time.
In this example, the tracker will send location data back to your mobile
phone every 30 minutes.
Authorize phone
number for SOS, B
and C button
W******,003,F,P,T1
(W******,003,F,P,T1,T2)
W000000,003,3,1,88888888
W000000,003,3,1,8888888
8,99999999