User manual

- 24 -
USER MANUAL
Write  - There are two functions for this button.
If you have several items to be set, you don’t have to click the ¾
Apply button one by one. When you fi nish all inputs, click the
Write button to apply all the settings to the tracker.
Or if you want to apply same settings to another tracker, click ¾
Write button when a new tracker is connected and ready to be
confi gured.
Auto  - when confi guration is complete and you need to apply same
parameters/settings to other trackers (for bulk confi guration), you can
simply check ‘Auto’ to make an automatic confi guration. After another
tracker is connected and turned on by pressing and holding SOS
button, immediately it will be automatically confi gured.
Default  - Initialize all parameters of the tracker back to factory
default. Restart the tracker to apply default settings.
Read  - Click Read button to read tracker’s previous settings or to
check if your inputs have been set to the tracker at any stage.
Close  - Click Close when confi guration is complete and then
remove the tracker. The COM port will be closed.
Copyright and Disclaimer 18.
© Blumax Technologies Ltd. All rights reserved.
The information contained herein may be changed at any time with-
out prior notifi cation. This manual nor any parts thereof may not be
reproduced for any purpose whatsoever without the express written
consent of Blumax, nor transmitted in any form either electronically
or mechanically, including photocopying and recording.
In no event shall Blumax be liable for direct, indirect, special,
incidental, or consequential damages (including but not limited to
economic loss, such as loss of profi ts, loss of use of profi ts, loss of
business or business interruption, loss of revenue, loss of goodwill
or loss of anticipated savings) arising out of the use or inability to
use the product or documentation, even if advised of the possibility
of such damages.