User manual

- 14 -
USER MANUAL
Set IP and Port7.5.3
SMS-Command: W******,012,IP,Port
Description: Sets IP and Port for tracker for GPRS communication.
Notes:
IP is your server’s IP or the domain name. 1.
Port: [1,65534]2.
Example:
W000000,012, 220.121.7.89,8500
W000000,012,www.blu-max.eu,8500
Set DNS Server IP (optional)7.5.4
SMS-Command: W******,009,DNS Server IP
Description: In case the domain name you set by the last SMS-
Command (W******,012,IP, Port) doesn’t work, which means your
server IP is not properly set. You can fi rst use this command to set DNS
Server IP (please check with your DNS server provider for the DNS
Server IP) and then redo the SMS-Command W******,012,IP, Port.
Example: W000000,009,220.23.4.90
Enable GPRS Tracking7.5.5
SMS-Command: W******,013,X
Description: Enables GPRS tracking function.
Notes:
X=0, to turn off GPRS tracking (default);
X=1, to enable GPRS tracking via TCP
X=2, to enable GPRS tracking via UDP;
Example: W000000,013,1
Set GPRS Interval7.5.6
SMS-Command: W******,014,XXXXX
Description: Sets time interval for sending GPRS packets.
Notes:
XXXXX should be in fi ve digits and in unit of 10 seconds.
XXXXX=00000, to turn off this function;
XXXXX=00001~65535, time interval for sending GPRS packet and
in unit of 10 seconds.
In this example, the tracker will send every 600 seconds (10 min.).