User manual

- 12 -
- 13 -
Blumax Bluetooth GPS-4013 Receiver
Other Functions
LED Indicators
Category Symbol Color Status Function
Bluetooth
Status
LED
Blue
Always on:
Bluetooth on, but not
connected to any Blue-
tooth devices yet
Slowly
blinking:
Sleeping mode (1 time
/ 5 seconds)
Quickly
blinking:
Bluetooth is connected
and ready for data
transmission (1 time /
2 seconds)
Battery
Status
LED
Red Blinking: The battery is too low
Green Light On: The battery is charging
Green Light Off:
The battery is fully
charged
GPS
Status
LED
Orange
Always on:
Acquiring satellites,
GPS position not x
Quickly
Blinking:
GPS position is xed,
Navigation
AGPS
Before you use GpsView software, you need to install Blumax
Bluetooth GPS-4013 Receiver driver. (Install InstallDriver.
exe driver for USB port from CD-ROM)
1. Start → Control → Panel → System → Hardware
→ Device Management → Connector (COM and LPT)
Check Com port position
2. Open GpsView.exe→Check Baud Rate and
Com port→click On