Product Literature

Cutting dimensions for bottom and back
Drawer back
Width
=
Y minus 12 then subtract 12
M Height
=
84 (3-5/16")
D Height
=
199 (7-13/16")
Y minimum
=
48 (1-7/8")
Y maximum
=
Trial recommended
Drawer bottom
Minimum width
=
43 (1-11/16") each
Length
=
Actual cabinet profile length minus 24 (15/16")
Y = Drawer bottom width minus (SW+63) divided by 2
AL = Actual cabinet profile length
ICW = Inside cabinet width
SW = Width of the sink
Y = Drawer bottom width of side 1 or 2 (variable)
Z = Actual cabinet profile length minus 164 (6-7/16")
NOTE: Use 16 (5/8") material for bottom and back
Y-12
Y-12
Y
Y
SW 63
ICW - 75
AL - 24
M Height 84
D Height 199
+
ICW
Drawer front preparation
*Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5
Y + 44
32
32
Ø10 x 12*
Y + 44
15.5 + overlay
15.5 + overlay
Ø10 x 12* Ø10 x 12*Ø10 x 12*
47.5 min.
47.5
min.
+ overlay
A
B
A
B
Dimensions in millimeters (inch equivalents as noted) © 2018 Blum, Inc.
57
TANDEMBOX
Required Parts