TANDEMBOX Deluxe Metal Drawer System
One system. Countless possibilities. This metal box system opens a world of design possibilities. The gray sides of TANDEMBOX can attach to any style front, giving cabinets their own unique look. With a variety of different applications from top and deep drawers to sink and corner solutions, TANDEMBOX can accommodate all areas of the kitchen. Our tried-and-tested TANDEMBOX drawers open smoothly and gently, even fully loaded.
Contents TANDEMBOX 4 Testing Standards 5 Easy Adjustments 6 Design and Features 7 Additional Information 8 Program Overview 10 Using the Catalog 11 Drawer Assembly 56 Dual Sink Drawer 58 Waste/recycle Set 60 Assembly Aids 64 Machines 66 Accessories 70 ORGA-LINE 72 Part Number Index
Testing Standards TANDEMBOX Blum's Testing Standards Blum, Inc. is ISO 9001 certified, which means that you can be assured of consistent quality in every Blum product. All Blum runners must pass these tests without showing a measurable reduction in performance or deviation in adjustment position. Testing standards vary between products and applications. All Blum runners meet or exceed ANSI/BHMA 156.9 grade 1 requirements. Contact your local Blum representative for more details.
Easy Adjustments TANDEMBOX Easy Adjustment with Just A Few Turns One of the many benefits of the TANDEMBOX system is the fully integrated three-dimensional adjustment mechanism. Height, side and front removal can be made easily through the opening in the drawer side beneath the cover cap. For drawers with gallery rails, tilt adjustment can be achieved by an adjustment at the end of the rail. Additionally, the drawer front can also be removed quickly with just a turn.
TANDEMBOX Design and Features Elegant Drawer Side Finish The drawer sides are available in a stylish gray finish, which include color coordinated cover caps. BLUMOTION All TANDEMBOX profiles have integrated BLUMOTION soft close technology, creating an unsurpassed opening and closing experience. BLUMOTION adapts to different weights and closing forces to give a smooth and silent close every time.
Additional Information > TANDEMBOX Online Resource for Planning Easy Planning Blum offers many online tools to help you with your kitchen planning and ordering. Online Product Configurator (OPC) offers a parts list and planning information based on your specifications. Once complete, your results can then be exported to a shareable document. OPC is easily accessible on our website at blum.
D Height with Double Gallery Interior Roll-out pages 36 - 39 8 pages 44 - 47 © 2018 Blum, Inc.
Program Overview TANDEMBOX Wrap-around SPACE CORNER Height SinkM application SPACE CORNER with Single Gallery Special Applications pages 52 - 55 Dual Sink Drawer Waste/recycle Set with SERVO-DRIVE pages 48 - 51 pages 56 - 57 pages82 58--83 59 page Dimensions in millimeters (inch equivalents as noted) © 2018 Blum, Inc.
TANDEMBOX 10 Using the Catalog Application Page Required Parts Provides details of the application and an overview of the p parts that make up p the drawer. Contains all necessary components with part numbers listed to order the drawer. Installation Dimensions Specifications Cabinet profile installation and cutting dimensions for the bottom and back of the drawer. Front and rear fixing bracket installation specifications. © 2018 Blum, Inc.
Drawer Assembly TANDEMBOX Step 1 Measure inside cabinet width Use 16 (5/8") material for drawer bottom and back Use inside cabinet width (ICW) to calculate the drawer bottom and back dimensions. Formulas are found on the specification page of each application.
N Height Application Features ▀ Full extension drawer system with BLUMOTION TANDEM smooth running mechanism Two-dimensional drawer front adjustment Dynamic load capacity of 75 lb ▀ Drawer side height 69 (2-11/16") ▀ ▀ ▀ Space Requirements 82.5* TANDEMBOX AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 3 2 4 1 NOTE: Parts identified on right page 12 © 2018 Blum, Inc.
Required Parts TANDEMBOX Cabinet and drawer profile sets Sets include: ▀ Left and right profile ▀ Drawer profile includes color coordinated cover caps 1 Cabinet profile 2 Drawer profile Nominal length Actual cabinet profile length 16" 400 (15-3/4") 578.4001B 378N4002SA 18" 450 (17-11/16") 578.4501B 378N4502SA 20" 500 (19-11/16") 578.5001B 378N5002SA 22" 550 (21-5/8") 578.5501B 378N5502SA 707N 612TH 75 lb Gray Installation wood screw 661.1300.
N Height TANDEMBOX Cabinet profile installation 400 450 578 500 550 32 32 96 128 37 256 416 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 75 (2-15/16") Length = Actual cabinet profile length minus 24 (15/16") 69 Drawer back Width = Inside cabinet width minus 87 (3-7/16") Height = 69 (2-11/16") AL - 24 ICW - 87 ICW ICW - 75 AL = Actual cabinet profile length ICW = Inside cabinet
Specifications TANDEMBOX Front fixing bracket installation 9 min. 15.5 + overlay 82.5 min. 33 min. 32.5 min. 32.5 min. + overlay 79.5 32 49.5 min. Ø10 x 12* 15.5 *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear fixing bracket installation Drawer back 69 38 22 9 Dimensions in millimeters (inch equivalents as noted) © 2018 Blum, Inc.
M Height Application Features ▀ Full extension drawer system with BLUMOTION TANDEM smooth running mechanism Two-dimensional drawer front adjustment Dynamic load capacity of 75 lb and 150 lb ▀ Drawer side height 84 (3-5/16") ▀ ▀ ▀ Space Requirements 98.5* TANDEMBOX AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 3 2 4 1 NOTE: Parts identified on right page 16 © 2018 Blum, Inc.
Required Parts TANDEMBOX Cabinet and drawer profile sets Sets include: ▀ Left and right profile ▀ Drawer profile includes color coordinated cover caps 1 Cabinet profile Nominal length Actual cabinet profile length 11" 270 (10-5/8") 578.2701B 378M2702SA 14" 350 (13-3/4") 578.3501B 378M3502SA 16" 400 (15-3/4") 578.4001B 378M4002SA 18" 450 (17-11/16") 578.4501B 576.4501B 378M4502SA 20" 500 (19-11/16") 578.5001B 576.5001B 378M5002SA 22" 550 (21-5/8") 578.5501B 576.
M Height TANDEMBOX Cabinet profile installation 270 350 400 578 450 500 550 192 450 500 576 550 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back 84 Drawer bottom Width = Inside cabinet width minus 75 (2-15/16") Length = Actual cabinet profile length minus 24 (15/16") Drawer back Width = Inside cabinet width minus 87 (3-7/16") Height = 84 (3-5/16") AL - 24 ICW - 87 ICW ICW
Specifications TANDEMBOX Front fixing bracket installation 98.5 min. 33 min. 9 min. 15.5 + overlay 47.5 min. + overlay 47.5 min. 95.5 32 65.5 min. Ø10 x 12* 15.5 *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear fixing bracket installation Drawer back 32 84 20 9 Dimensions in millimeters (inch equivalents as noted) © 2018 Blum, Inc.
B Height with Single Gallery Application Features ▀ ▀ ▀ ▀ ▀ Space Requirements Full extension drawer system with BLUMOTION TANDEM smooth running action Three-dimensional drawer front adjustment Dynamic load capacities of 75 lb and 150 lb Drawer side height 146 (5-3/4") 160* TANDEMBOX AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 4 3 2 5 1 NOTE: Parts identified on right page 20 © 2018 Blum, Inc.
Required Parts TANDEMBOX Cabinet and drawer profile sets Sets include: ▀ Left and right profile ▀ Drawer profile includes color coordinated cover caps 1 Cabinet profile 2 Drawer profile Nominal length Actual cabinet profile length 16" 400 (15-3/4") 578.4001B 18" 450 (17-11/16") 578.4501B 576.4501B 378M4502SA 20" 500 (19-11/16") 578.5001B 576.5001B 378M5002SA 22" 550 (21-5/8") 578.5501B 576.5501B 378M5502SA 24" 600 (23-5/8") 576.6001B 378M6002SA 26" 650 (25-9/16") 576.
B Height with Single Gallery TANDEMBOX Cabinet profile installation 400 450 578 500 550 192 450 500 550 576 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 75 (2-15/16") Length = Actual cabinet profile length minus 24 (15/16") 135 Drawer back Width = Inside cabinet width minus 87 (3-7/16") Height = 135 (5-5/16") ICW - 87 AL -
Specifications TANDEMBOX Front fixing bracket installation 160 min. 33 min. 9 min. 15.5 + overlay 47.5 min. 47.5 min. + overlay 95.5 32 127 min. 64 Ø10 x 12* 15.5 *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear fixing bracket installation Drawer back 32 32 135 39 9 Dimensions in millimeters (inch equivalents as noted) © 2018 Blum, Inc.
D Height with Single Gallery Application Features ▀ ▀ ▀ ▀ ▀ Space Requirements Full extension drawer system with BLUMOTION TANDEM smooth running action Three-dimensional drawer front adjustment Dynamic load capacities of 75 lb and 150 lb Drawer side height 207 (8-1/8") 228* TANDEMBOX AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 4 3 2 1 5 NOTE: Parts identified on right page 24 © 2018 Blum, Inc.
Required Parts TANDEMBOX Cabinet and drawer profile sets Sets include: ▀ Left and right profile ▀ Drawer profile includes color coordinated cover caps 1 Cabinet profile 2 Drawer profile Nominal length Actual cabinet profile length 16" 400 (15-3/4") 578.4001B 18" 450 (17-11/16") 578.4501B 576.4501B 378M4502SA 20" 500 (19-11/16") 578.5001B 576.5001B 378M5002SA 22" 550 (21-5/8") 578.5501B 576.5501B 378M5502SA 24" 600 (23-5/8") 576.6001B 378M6002SA 26" 650 (25-9/16") 576.
D Height with Single Gallery TANDEMBOX Cabinet profile installation 400 450 578 500 550 192 450 500 550 576 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 75 (2-15/16") Length = Actual cabinet profile length minus 24 (15/16") Drawer back 199 Width = Inside cabinet width minus 87 (3-7/16") Height = 199 (7-13/16") ICW - 87 AL -
Specifications TANDEMBOX Front fixing bracket installation 15.5 + overlay 228 min. 33 min. 47.5 min. 9 min. 47.5 min. + overlay 95.5 32 195 min. 128 Ø10 x 12* 15.5 *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear fixing bracket installation Drawer back 32 32 199 64 32 8 9 Dimensions in millimeters (inch equivalents as noted) © 2018 Blum, Inc.
D Height with Double Gallery Application Features ▀ ▀ ▀ ▀ ▀ Space Requirements Full extension drawer system with BLUMOTION TANDEM smooth running action Three-dimensional drawer front adjustment Dynamic load capacities of 75 lb and 150 lb Drawer side height 207 (8-1/8") 228* TANDEMBOX AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 4 3a 3b 2 1 5 NOTE: Parts identified on right page 28 © 2017 Blum, Inc.
Required Parts TANDEMBOX Cabinet and drawer profile sets Sets include: ▀ Left and right profile ▀ Drawer profile includes color coordinated cover caps Nominal length 1 Cabinet profile Actual cabinet profile length 75 lb 150 lb Gray 16" 400 (15-3/4") 578.4001B 18" 450 (17-11/16") 578.4501B 576.4501B 378M4502SA 20" 500 (19-11/16") 578.5001B 576.5001B 378M5002SA 22" 550 (21-5/8") 578.5501B 576.5501B 378M5502SA 707N 707N 612TH 661.1300.HG 661.1300.
D Height with Double Gallery TANDEMBOX Cabinet profile installation 400 450 578 500 550 128 192 450 500 576 550 32 32 32 96 128 37 256 416 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 75 (2-15/16") Length = Actual cabinet profile length minus 24 (15/16") 199 Drawer back Width = Inside cabinet width minus 87 (3-7/16") Height = 199 (7-13/16") ICW - 87 AL - 24 ICW AL = Actua
Specifications TANDEMBOX Front fixing bracket installation 228 min. 33 min. 9 min. 15.5 + overlay 47.5 min. 47.5 min. + overlay 95.5 32 64 195 min. 128 64 Ø10 x 12* 15.5 *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear fixing bracket installation Drawer back 32 32 199 64 32 8 9 Dimensions in millimeters (inch equivalents as noted) © 2018 Blum, Inc.
D Height Gallery with Design Element Application Features ▀ ▀ ▀ ▀ ▀ Space Requirements Full extension drawer system with BLUMOTION TANDEM smooth running mechanism Three-dimensional drawer front adjustment Dynamic load capacity of 75 lb and 150 lb Drawer side height 207 (8-1/8") 228* TANDEMBOX AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 5a 6 3 5b 4 2 1 7 NOTE: Parts identified on right page 32 © 2018 Blum, Inc.
Required Parts TANDEMBOX Cabinet and drawer profile sets Sets include: ▀ Left and right profile ▀ Drawer profile includes color coordinated cover caps 1 Cabinet profile 2 Drawer profile Nominal length Actual cabinet profile length 18" 450 (17-11/16") 578.4501B 576.4501B 378M4502SA 20" 500 (19-11/16") 578.5001B 576.5001B 378M5002SA 22" 550 (21-5/8") 578.5501B 576.5501B 378M5502SA 26" 650 (25-9/16") 576.6501B 378M6502SA 707N 707N 612TH 661.1300.HG 661.1300.
D Height Gallery with Design Element TANDEMBOX Cabinet profile installation 450 500 578 550 450 500 550 576 650 32 96 128 19 37 256 320 384 416 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 75 (2-15/16") Length = Actual cabinet profile length minus 24 (15/16") 199 Drawer back Width = Inside cabinet width minus 87 (3-7/16") Height = 199 (7-13/16") ICW - 87 AL - 24 ICW IC
Specifications TANDEMBOX Front fixing bracket installation 15.5 + overlay 228 min. 33 min. 47.5 min. 9 min. 47.5 min. + overlay 95.5 32 195 min. 128 Ø10 x 12* 15.5 *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear fixing bracket installation Drawer back 32 32 199 64 32 8 9 Dimensions in millimeters (inch equivalents as noted) © 2018 Blum, Inc.
M Height Interior Roll-out Application Features ▀ ▀ ▀ ▀ ▀ Space Requirements Full extension drawer system with BLUMOTION TANDEM smooth running mechanism Two-dimensional drawer front adjustment Dynamic load capacity of 75 lb and 150 lb Drawer side height 84 (3-5/16") 136.5 106* TANDEMBOX AL = Actual cabinet profile length *Minimum opening with handle and 3 (1/8") clearance Components 5 2 1 3 6 4 7 NOTE: Parts identified on right page 36 © 2018 Blum, Inc.
Required Parts TANDEMBOX Cabinet and drawer profile sets Sets include: ▀ Left and right profile ▀ Drawer profile includes color coordinated cover caps 1 Cabinet profile 2 Drawer profile Nominal length Actual cabinet profile length 11" 270 (10-5/8") 578.2701B 378M2702SA 14" 350 (13-3/4") 578.3501B 378M3502SA 16" 400 (15-3/4") 578.4001B 378M4002SA 18" 450 (17-11/16") 578.4501B 576.4501B 378M4502SA 20" 500 (19-11/16") 578.5001B 576.5001B 378M5002SA 22" 550 (21-5/8") 578.5501B 576.
M Height Interior Roll-out TANDEMBOX Cabinet profile installation 270 350 400 578 450 500 550 192 450 500 576 550 600 650 32 32 96 32 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back 84 Drawer bottom Width = Inside cabinet width minus 75 (2-15/16") Length = Actual cabinet profile length minus 24 (15/16") Drawer back AL - 24 ICW - 87 Width = Inside cabinet width minus 87 (3-7/16") Height = 84 (3
Specifications TANDEMBOX Rear fixing bracket installation 32 84 33 min. 95.5 103.5 min. 73* 136.5 min. 106* 20 9 15.5 *Measurement for use with handle (ZIF.80M5) Front boring dimensions for interior front handle Cutting front piece Using a metal cutting blade, cut front piece to size. X = Inside cabinet width minus 132 (5-3/16") X X + 47 Ø25 x 12 61.5 17 min.
D Height with Single Gallery Interior Roll-out Application Features ▀ ▀ ▀ ▀ ▀ Space Requirements Full extension drawer system with BLUMOTION TANDEM smooth running mechanism Three-dimensional drawer front adjustment Dynamic load capacity of 75 lb and 150 lb Drawer side height 207 (8-1/8") 228* TANDEMBOX AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 6 3 2 7 1 5 4 NOTE: Parts identified on right page 40 © 2018 Blum, Inc.
Required Parts TANDEMBOX Cabinet and drawer profile sets Sets include: ▀ Left and right profile ▀ Drawer profile includes color coordinated cover caps Nominal length 1 Cabinet profile Actual cabinet profile length 2 Drawer profile 75 lb 150 lb Gray 16" 400 (15-3/4") 578.4001B 18" 450 (17-11/16") 578.4501B 576.4501B 378M4502SA 20" 500 (19-11/16") 578.5001B 576.5001B 378M5002SA 22" 550 (21-5/8") 578.5501B 576.5501B 378M5502SA 24" 600 (23-5/8") 576.
D Height with Single Gallery Interior Roll-out TANDEMBOX Cabinet profile installation 400 450 578 500 450 550 192 450 500 – 550 500 550 576 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 75 (2-15/16") Length = Actual cabinet profile length minus 24 (15/16") 199 Drawer back Width = Inside cabinet width minus 87 (3-7/16")
Specifications TANDEMBOX Front fixing bracket installation 64 33 min. 95.5 32 32 199 228 min. 195 min. 32 8 9 15.5 *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Cutting front piece Cutting cross rail Using metal cutting blade, cut front piece to size. Using metal cutting blade, cut cross rail to size.
D Height with Double Gallery Interior Roll-out Application Features ▀ ▀ ▀ ▀ ▀ Space Requirements Full extension drawer system with BLUMOTION TANDEM smooth running mechanism Three-dimensional drawer front adjustment Dynamic load capacity of 75 lb and 150 lb Drawer side height 207 (8-1/8") 228* TANDEMBOX AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 7 4 3 2 8 1 6 5 NOTE: Parts identified on right page 44 © 2018 Blum, Inc.
Required Parts TANDEMBOX Cabinet and drawer profile sets Sets include: ▀ Left and right profile ▀ Drawer profile includes color coordinated cover caps 1 Cabinet profile 2 Drawer profile Nominal length Actual cabinet profile length 16" 400 (15-3/4") 578.4001B 18" 450 (17-11/16") 578.4501B 576.4501B 378M4502SA 20" 500 (19-11/16") 578.5001B 576.5001B 378M5002SA 22" 550 (21-5/8") 578.5501B 576.5501B 378M5502SA 707N 707N 612TH 661.1300.HG 661.1300.
D Height with Double Gallery Interior Roll-out TANDEMBOX Cabinet profile installation 400 450 500 578 550 192 450 500 576 550 32 96 128 37 256 320 416 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = Inside cabinet width minus 75 (2-15/16") Length = Actual cabinet profile length minus 24 (15/16") 199 Drawer back Width = Inside cabinet width minus 87 (3-7/16") Height = 199 (7-13/16") ICW - 87 AL - 24 ICW I
Specifications TANDEMBOX Front fixing bracket installation 64 33 min. 95.5 32 32 199 228 min. 195 min. 32 8 9 15.5 *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Cutting front piece Cutting cross rail Using metal cutting blade, cut front piece to size. Using metal cutting blade, cut cross rail to size.
SPACE CORNER M Height Application Features ▀ ▀ ▀ ▀ Space Requirements Full extension drawer system with BLUMOTION TANDEM smooth running mechanism Two-dimensional drawer front adjustment Dynamic load capacity of 150 lb 101.5* TANDEMBOX AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 3a 1 3b 3c 2 48 © 2018 Blum, Inc.
Required Parts TANDEMBOX Cabinet and drawer profile sets Sets include: ▀ Left and right profile ▀ Drawer profile includes color coordinated cover caps 1 Cabinet profile 2 Drawer profile Nominal length Actual cabinet profile length 24" 600 (23-5/8") 576.6001B 378M6002SA 26" 650 (25-9/16") 576.6501B 378M6502SA 707N 612TH Installation wood screw Installation system screw 150 lb Gray 661.1300.
SPACE CORNER M Height TANDEMBOX Cabinet profile installation 600 650 32 32 32 96 32 67 256 82 320 384 100 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Drawer back cutting dimensions Drawer bottom cutting dimensions Bottom width = Inside cabinet width minus 75 (2-15/16") Bottom length = Bottom width divided by two, plus actual cabinet profile length minus 4 (3/16") Left 45° Calculating cutting of drawer backs 50 Right back piece X = Opening width minus
Specifications TANDEMBOX SPACE CORNER preparation for ORGA-LINE In order to use ORGA-LINE in an M height SPACE CORNER, the drawer must be fitted with two vertical wooden cross dividers that are spaced 474 (18-11/16") apart. 45° 16 Back panel 4 64 47 300 ICW minus 45 14 Front panel R10.5 55.8° 8.8° 20.3 Front fixing bracket installation Corner rear fixing bracket installation EXPANDO 9 9 30 + overlay 20 32 84 95.5 9 min. 47.5 min. + overlay 32 33 68.5 min. min. 101.5 min.
SPACE CORNER with Single Gallery TANDEMBOX Features ▀ ▀ ▀ ▀ Space Requirements Full extension drawer system with BLUMOTION TANDEM smooth running mechanism Three-dimensional drawer front adjustment Dynamic load capacity of 150 lb 224* Application AL = Actual cabinet profile length *Minimum opening height based on 3 (1/8") clearance Components 6a 6a 5 3 6b 2 1 4c 4b 52 © 2018 Blum, Inc.
Required Parts D TANDEMBOX Cabinet and drawer profile sets Sets include: ▀ Left and right profile ▀ Drawer profile includes color coordinated cover caps 1 Cabinet profile 2 Drawer profile Nominal length Actual cabinet profile length 24" 600 (23-5/8") 576.6001B 378M6002SA 26" 650 (25-9/16") 576.6501B 378M6502SA 707N 612TH 150 lb Installation wood screw 661.1300.
SPACE CORNER with Single Gallery TANDEMBOX Cabinet profile installation 600 650 32 32 32 96 32 67 256 82 320 384 100 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Drawer back cutting dimensions Drawer bottom cutting dimensions Bottom width = Inside cabinet width minus 75 (2-15/16") Bottom length = Bottom width divided by two, plus actual cabinet profile length minus 4 (3/16") Left 45° actual length minus 4 199 X bottom length Right 45° bottom width C
Specifications Front fixing bracket installation TANDEMBOX Corner rear fixing bracket installation EXPANDO 9 9 9 min. 64 33 min. 32 95.5 32 199 195 min. 128 47.5 min. + overlay 32 30 + overlay 228 min. 32 8 Ø10 x 12 30 Cabinet measurements A minimum clearance of 3 (1/8") must be maintained between the opening path of the drawer front of the SPACE CORNER and the edge of the adjacent drawer front (including the drawer handle).
Dual Sink Drawer TANDEMBOX Application Features ▀ ▀ ▀ ▀ M Height D Height with Single Gallery Required components and specifications Required components and specifications page 16-19 M Height 56 Full extension drawer system with BLUMOTION TANDEM smooth running mechanism Three-dimensional drawer front adjustment Dynamic load capacity of 75 lb and 150 lb © 2018 Blum, Inc.
Required Parts TANDEMBOX Cutting dimensions for bottom and back A Drawer back Width = Y minus 12 then subtract 12 M Height = 84 (3-5/16") D Height = 199 (7-13/16") Y minimum = 48 (1-7/8") Y maximum = Trial recommended M Height 84 D Height 199 A Y-12 Y-12 Y Y B Drawer bottom Minimum width = 43 (1-11/16") each Length = Actual cabinet profile length minus 24 (15/16") AL - 24 B Y = Drawer bottom width minus (SW+63) divided by 2 SW + 63 ICW - 75 ICW AL = Actual cabinet profile length ICW = Inside cab
Waste/recycle Set with SERVO-DRIVE TANDEMBOX Application Features Basic Components Pre-assembled bottom mount solution TANDEMBOX heavy duty full extension drawer system For 12", 15" and 18" minimum opening widths For face frame and frameless applications Three-dimensional drawer front adjustment Maximum 6 (1/4") cabinet bottom recess TANDEM smooth running action 175 lb static, 150 lb dynamic load rating SERVO-DRIVE touch-to-open feature ▀ ▀ ▀ ▀ ▀ ▀ ▀ ▀ ▀ NOTE: Bins not included TANDEMBOX waste/recy
Specifications TANDEMBOX Drawer and Cabinet Specifications Front view Important 6 (1/4") minimum top clearance opening width Bin width and height must be considered when designing your cabinet (see the diagram on the left). need bin height, not bin ht with drawer.
Assembly Aids TANDEMBOX Cabinet profile template ▀ ▀ Used for pre-boring holes for LEGRABOX, TANDEMBOX, and TANDEM drawer runners Can also be used to pre-bore AVENTOS locating pins and pre-boring for hinge mounting plates Part no. Cabinet profile template 65.1000.01 Replacement template 65.1001.01 Ø2.5 drill bit DB-2.5mm Components Cabinet profile template includes: 1 Rail, 1 meter long (qty 1) 2 Ø2.
Assembly Aids TANDEMBOX Universal individual template ▀ Used for pre-boring holes for LEGRABOX, TANDEMBOX, and TANDEM drawer runners ▀ Can also be use to pre-bore for AVENTOS locating pins and pre-boring for hinge mounting plates ▀ Calibrated scale for accurate setting Set includes: ▀ Universal individual template ▀ Ø2.5 and Ø5 stop collars Part no. Universal individual template 65.1051.02 Ø2.5 drill bit DB-2.
Assembly Aids TANDEMBOX Universal boring template Set includes: 1 ▀ 1 Template ▀ 2 Ø5 marking pin ▀ 3 Ø10 marking pin ▀ 4 Ø5 stop collar ▀ 5 Ø10 stop collar ▀ Used for boring drawer fronts, locates all fixing positions ▀ Used to pre-bore for drawer fronts, bottoms and backs for LEGRABOX, TANDEMBOX and METABOX drawer systems, also AVENTOS mounting plates Part no. 2 Ø5 3 Ø10 4 Ø5 5 Ø10 Universal boring template ZML.0040.
Assembly Aids TANDEMBOX BOXFIX E-T Using BOXFIX E-T you can manually assemble TANDEMBOX easier than ever. Its easy setup and comfortable work height all contribute to a more efficient assembly of TANDEMBOX drawers. ▀ ▀ ▀ For all TANDEMBOX heights and lengths For cabinet widths 250 to 1200 (9-13/16" to 47-1/4") For cabinet back heights up to 250 (9-13/16") Part no. ZMM.0350 BOXFIX E-T BOXFIX P Using the new BOXFIX P you can assemble TANDEMBOX and LEGRABOX faster than ever.
TANDEMBOX Machines MINIPRESS P – Deluxe boring and insertion machine ▀ ▀ ▀ ▀ ▀ ▀ ▀ ▀ Front adjustable boring distance with digital counter Pneumatic hold-down clamps Boring depth adjustment Ruler stops (qty 4) Tool kit included Dust collection attachment Optional laser center line set Accepts 8 or 9 spindle heads Part no. Single phase – 220V power M53.1053*US Three-phase – 220V power M53.
Machine Accessories TANDEMBOX 8 spindle head ▀ ▀ ▀ ▀ ▀ ▀ ▀ 8 spindle head for use with MINIPRESS/MINIDRILL Bores eight holes spaced 32 apart, perpendicular to the fence Quick-disconnect chucks Once aligned, does not require additional adjustment Bores all METABOX/TANDEMBOX/LEGRABOX front fixing brackets and galleries Bores cabinet side panels for all Blum runner systems Requires retrofit set for use with machines produced in 2009 or prior Includes: ▀ Ø3 allen wrench ▀ Distance spacer ▀ Drive pin ▀ Air ho
Accessories TANDEMBOX Accessories TANDEMBOX cover caps For use with TANDEMBOX drawers Non-handed, symmetrical design Gray Custom logo printing available ▀ ▀ ▀ ▀ Part no. ZAA.532C Gray cover cap Front boring dimensions 47.5 min. 9 9 ▀ Space requirements 39.
Accessories TANDEMBOX Lateral stabilizer set Set includes: 1 Linkage rod, 1076 (42-3/8") cut to size 2 Pinion gears (qty 2) 1 3 Rear brackets, left and right 3 4 Gear racks, left and right Recommended for cabinets 900 to 1200 (35" to 47") wide ▀ 2 4 Drawer length Linkage rod specifications ▀ ▀ Part no. 500 (20") ZST.500BA 550 (22") ZST.
Accessories TANDEMBOX METAFILE set Set makes one standard hanging file. Recommended use in combination with B height drawer. Set includes: 1 Steel hanging rails (qty 4) – 3 x 13 x 550 (1/8" x 1/2" x 21-5/8") 2 Rail support brackets (qty 4) 4 5 3 Rail support covers (qty 4) 3 4 Glide profiles (qty 4) – length 550 (21-5/8") 5 Lateral brackets (qty 4) 6 Flathead wood screws (qty 8) – #6 x 19 (3/4") 4 2 1 Part no. ZRM.5500 METAFILE set 6 Replacement parts Rail support covers ZRM.
Accessories POZI DRIVER and bits TANDEMBOX Bumpers A POZI screwdriver (different from Phillips) is the most crucial tool you can use to assure that full torque is applied to all Blum mounting screws. POZI screws can be identified by the distinctive “tick” marks located in the center of the screw head recess. Phillips POZI ▀ ▀ Cushions door closing Clear with a self-adhesive back diameter thickness Tick marks Part no. #2 POZI DRIVER 1/4" Magnetic bit holder BIT HOLDER Part no.
ORGA-LINE TANDEMBOX Blum’s Ideas for Functional Kitchens Design doesn't have to stop with the kitchen layout. This adjustable organization solution for TANDEMBOX can be customized to fit individual needs. Whether in the kitchen, office or bathroom, for top drawers and deep drawers alike, there's a place for everything. The removable trays are made of high-quality nylon and stainless steel, and are dishwasher safe up to 170°F. You can be sure they will last the lifetime of your kitchen.
ORGA-LINE TANDEMBOX B or D Height TANDEMBOX with Gallery Rails A Cross gallery rail divider B ▀ ▀ A ▀ Length 1118 (44-1/32") Opening width minus 63 (2-1/2") Available in brush nickel or gray Part no. Cross gallery rail divider ZRG.1118Q B Cross gallery rail connector ▀ ▀ Two required Available in light gray or dust gray B Part no. Cross gallery rail connector ZRU.
TANDEMBOX Part number index Part no. Page no. 376M55B7SAB 58 65.1001.01 60 ZIF.71M0 37 376M55B7SAD 58 65.1051.02 61 ZIF.75D0.US 41, 45 376M55B7SAF 58 65.1106 61 ZIF.80M5 37 378M2702SA 17, 37 661.1300.HG 69 ZIF.80M7 37 378M3502SA 17, 37 661.1450.HG 69 ZML.0040.01 62 378M4002SA 17, 21, 25, 29, 37, 41, 45 7074N 69 ZML.3580.01 62 707N 69 ZML.3600 62 378M4502SA 17, 21, 25, 29, 33, 37, 41, 45 BIT HOLDER 69 ZMM.0350 63 DB-10mm 62 ZMM.2750.
Notes TANDEMBOX Dimensions in millimeters (inch equivalents as noted) © 2018 Blum, Inc.
Why Choose Blum Blum, Inc. is a leading manufacturer of functional hardware for the kitchen cabinet and commercial casework industries specializing in lift systems, concealed hinges and drawer runner systems. Virtually all of the hardware needed to assemble and make cabinets functional is available within the wide range of quality Blum products. Blum supports the U.S.
Blum, Inc. 7733 Old Plank Rd. Stanley, NC 28164 800-438-6788 blum.com Please visit blum.com for information on other Blum products LIT.TBX1000. . Ident. 26232340 © 2018 Blum, Inc.
