Installation Guide

3-7/16"

10-3/8"

6-15/16"

3-7/16"

Triple tray

Single tray

Double tray

ORGA-LINE for TANDEM drawers

ORGA-LINE divider sets for TANDEM

drawers are easily installed without

tools. The spring-loaded components

fit into the drawers snugly and the

connector pieces are assembled with

dovetail slots.

Cutlery tray kits can be arranged in various configurations. The compensation tray can be positioned in front or back (example ZHI.533KI4A).

Tool-free installation

ORGA-LINE kits have trays in three

lengths. Most cutlery kits come with

five triple length trays. Other kits

may have double or single length

trays included.

ORGA-LINE kit assembly

1. Place spring-loaded side rails in drawer and join

them with the end connectors.

2. Install the tray partition in the first set of holes on

the side rail.

3. If applicable, install additional side rails and end

connectors for utensil dividers.

4. Place the spring-loaded compensation tray

between the tray partition and the end connector.

5. Insert the cutlery trays in any desired configuration.

6. Install the adjustable divider in the utensil section.

End connector

Tray partition

Side rail

Compensation tray

Side rail for

utensil dividers

End connector

Cutlery tray

Adjustable

divider

Tray configurations

Tray sizes