TANDEMBOX Catalog

ManualsBrandsBlum ManualsDrawer SlidesBlum TANDEMBOX 40-13/16 Inch Interior Roll-Out Front Piece Without Groove - Pack of 12

www.blum.com

TANDEMBOX

Premium metal drawer system

TANDEMBOX plus BLUMOTIONTANDEMBOX

blum.com

Summary of content (100 pages)

PAGE 1
TANDEMBOX plus BLUMOTION TANDEMBOX Premium metal drawer system www.blum.com blum.
PAGE 2
PAGE 3
Unmatched function and design The TANDEMBOX program opens a new world of design possibilities TANDEMBOX combines superior quality of motion and unsurpassed running action with an exciting new design. The drawer side profile, either with a color coordinated BOXCAP, a unique design element or gallery rails creates a well-balanced and stylish deep drawer.
PAGE 4
Design possibilities Exciting and creative solutions for drawers TANDEMBOX brings endless possibilities to inspire and stimulate creativity. Combining premium metal drawer sides in gray and stainless steel ﬁnishes with drawer side design elements from a wide spectrum of materials, TANDEMBOX offers numerous solutions for innovative deep drawer design. For continuous design Use BOXCAP in the same material and ﬁnish as the drawer side to create a continuous design.
PAGE 5
Elegant drawer side finishes The drawer sides are available in two gray stainless steel ﬁnishes, which include color coordinated cover caps. Gray (gray cap included) and stainless steel (silver cap included). BLUMOTION All TANDEMBOX proﬁles have BLUMOTION soft closing creating an unsurpassed opening and closing experience. BLUMOTION adapts to different weights and closing forces to give a smooth and silent close every time.
PAGE 6
TANDEMBOX adjustment made easy Easy adjustment with just a few turns Just one of the many beneﬁts of the TANDEMBOX system is the fully integrated three-dimensional adjustment mechanism. Height, side and tilt adjustments can be made easily through the opening in the drawer side beneath the cover cap. For drawers with gallery rails, tilt adjustment can be achieved by an adjustment at the end of the rail. Additionally, the drawer front can also be removed quickly with just a turn.
PAGE 7
i > TANDEMBOX planning tool Easy planning and ordering Blum offers many online tools to help you with your kitchen planning and ordering. Planning tools allow you to select components based on your cabinet construction and size. Additional components can be selected as needed. Once complete, they provide an easy-to-follow order form. Planning tools are easily accessible on our website at blum.
PAGE 8
TANDEMBOX program overview N height Standard applications M height M height interior drawer page 12 - 15 page 44 - 47 B height with single gallery page 16 - 19 D height with single gallery D height with single gallery interior drawer page 20 - 23 D height with double gallery D height with double gallery interior drawer page 24 - 27 page 28 - 31 Assemblyaids aids Assembly 8 © 2013 Blum, Inc. page 82 - 87 Accessories Subject to technical modiﬁcations without notice.
PAGE 9
page 64 - 67 page 76 - 77 Assembly aids page 82 - 87 Waste/recycle set Dual drawer sink application Wrap around sink application SPACE CORNER with design element SPACE CORNER with gallery Wrap-around SPACE CORNER height SinkMapplication D height with BOXCAP page 40 - 43 D height with BOXCAP interior drawer page 37 - 39 D height with design element interior drawer D height with design element D height – single gallery with design element i Standard applications page 32 - 35 Accessories page
PAGE 10
Using the TANDEMBOX catalog Application page Required parts Provides details of the application and an overview of the parts that make up the drawer. Contains all necessary components with part numbers listed to order the drawer.
PAGE 11
i Drawer assembly Step 1 Measure inside cabinet width Use 16 (5/8") material for drawer bottom and back Use opening width (ICW) to calculate the drawer bottom and back dimensions. Formulas are found on the speciﬁcation page of each application.
PAGE 12
TANDEMBOX N height drawer Application Description Space requirements ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Two-dimensional drawer front adjustment ■ Dynamic load capacity of 75 lb ■ Drawer side height 69 (2-11/16") 82.5 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 3 2 4 1 NOTE: Parts identiﬁed on right page Assembly aids 12 © 2013 Blum, Inc.
PAGE 13
N Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps 1 cabinet proﬁle actual cabinet proﬁle length nominal length 2 drawer proﬁle 75 lb gray 400 (15-3/4") 558.4001B 358N4002SA 358N4002IA 18" 450 (17-11/16") 558.4501B 358N4502SA 358N4502IA 20" 500 (19-11/16") 558.5001B 358N5002SA 358N5002IA 22" 550 (21-5/8") 558.
PAGE 14
TANDEMBOX N height drawer Cabinet proﬁle installation 400 558 450 500 550 32 32 96 128 37 256 416 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") 69 Drawer back Width = opening width minus 87 (3-7/16") Height = 69 (2-11/16") AL - 24 ICW - 87 ICW ICW - 75 AL = actual cabinet proﬁle length ICW = opening width NOTE: U
PAGE 15
N Speciﬁcations Front ﬁxing bracket installation cabinet drawer front 9 min. 33 min. 32.5 min. 32.5 min. + overlay 79.5 32 49.5 min. 82.5 min. Ø10 x 12* 15.5 + overlay 15.5 *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear ﬁxing bracket installation drawer back 69 38 22 9 Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
PAGE 16
TANDEMBOX M height drawer Application Description Space requirements ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Two-dimensional drawer front adjustment ■ Dynamic load capacity of 75 lb and 150 lb ■ Drawer side height 84 (3-5/16") 98.5 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 3 2 4 1 NOTE: Parts identiﬁed on right page Assembly aids 16 © 2013 Blum, Inc.
PAGE 17
M Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps actual cabinet proﬁle length nominal length 1 cabinet proﬁle 75 lb 150 lb gray stainless steel 11" 270 (10-5/8") 558.2701B 14" 350 (13-3/4") 558.3501B 358M3502SA 358M3502IA 16" 400 (15-3/4") 558.4001B 358M4002SA 358M4002IA 358M2702SA 358M2702IA 18" 450 (17-11/16") 558.4501B 556.4501B 358M4502SA 358M4502IA 20" 500 (19-11/16") 558.
PAGE 18
TANDEMBOX M height drawer Cabinet proﬁle installation 558 270 350 400 450 500 550 192 556 450 500 550 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back 84 Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") Drawer back Width = opening width minus 87 (3-7/16") Height = 135 (5-5/16") AL - 24 ICW - 87 ICW ICW - 75
PAGE 19
M Speciﬁcations Front ﬁxing bracket installation cabinet drawer front 15.5 + overlay 15.5 98.5 min. 33 min. 47.5 min. 9 47.5 min. + overlay 95.5 32 65.5 min. Ø10 x 12* *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear ﬁxing bracket installation drawer back 32 84 20 9 Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
PAGE 20
TANDEMBOX B height drawer with single gallery Application Description Space requirements ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running action ■ Three-dimensional drawer front adjustment ■ Dynamic load capacities of 75 lb and 150 lb ■ Drawer side height 146 (5-3/4") 160 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 4 3 2 1 5 NOTE: Parts identiﬁed on right page Assembly aids 20 © 2013 Blum, Inc.
PAGE 21
B Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps nominal length 1 cabinet proﬁle actual cabinet proﬁle length 16" 400 (15-3/4") 2 drawer proﬁle 75 lb 150 lb gray 558.4001B stainless steel 358M4002SA 358M4002IA 18" 450 (17-11/16") 558.4501B 556.4501B 358M4502SA 358M4502IA 20" 500 (19-11/16") 558.5001B 556.5001B 358M5002SA 358M5002IA 22" 550 (21-5/8") 558.
PAGE 22
TANDEMBOX B height drawer with single gallery Cabinet proﬁle installation 558 400 450 500 550 192 556 450 500 550 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") 135 Drawer back Width = opening width minus 87 (3-7/16") Height = 135 (5-5/16") ICW - 87 AL - 24 I
PAGE 23
B Speciﬁcations Front ﬁxing bracket installation cabinet drawer front 15.5 + overlay 15.5 160 min. 33 min. 9 47.5 min. 47.5 min. + overlay 95.5 32 64 127 min. Ø10 x 12* *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear ﬁxing bracket installation drawer back 32 32 135 39 9 Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
PAGE 24
TANDEMBOX D height drawer with single gallery Application Description Space requirements ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running action ■ Three-dimensional drawer front adjustment ■ Dynamic load capacities of 75 lb and 150 lb ■ Drawer side height 207 (8-1/8") 228 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 4 3 2 1 5 NOTE: Parts identiﬁed on right page Assembly aids 24 © 2013 Blum, Inc.
PAGE 25
D Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps nominal length 1 cabinet proﬁle actual cabinet proﬁle length 16" 400 (15-3/4") 2 drawer proﬁle 75 lb 150 lb gray 558.4001B stainless steel 358M4002SA 358M4002IA 18" 450 (17-11/16") 558.4501B 556.4501B 358M4502SA 358M4502IA 20" 500 (19-11/16") 558.5001B 556.5001B 358M5002SA 358M5002IA 22" 550 (21-5/8") 558.
PAGE 26
TANDEMBOX D height drawer with single gallery Cabinet proﬁle installation 558 400 450 500 550 192 556 450 500 550 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") Drawer back Width = opening width minus 87 (3-7/16") 199 Height = 199 (7-13/16") ICW - 87 AL - 24
PAGE 27
D Speciﬁcations Front ﬁxing bracket installation cabinet drawer front 15.5 + overlay 15.5 228 min. 33 min. 9 47.5 min. 47.5 min. + overlay 95.5 32 195 min. 128 Ø10 x 12* *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear ﬁxing bracket installation drawer back 32 32 199 64 32 8 9 Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
PAGE 28
TANDEMBOX D height drawer with double gallery Application Description Space requirements ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running action ■ Three-dimensional drawer front adjustment ■ Dynamic load capacities of 75 lb and 150 lb ■ Drawer side height 207 (8-1/8") 228 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 4 3a 3b 2 1 5 NOTE: Parts identiﬁed on right page Assemblyaids aids Assembly 28 © 2013 Blum, Inc.
PAGE 29
D Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps 1 cabinet proﬁle actual cabinet proﬁle length nominal length 75 lb 150 lb gray stainless steel 16" 400 (15-3/4") 558.4001B 358M4002SA 358M4002IA 18" 450 (17-11/16") 558.4501B 556.4501B 358M4502SA 358M4502IA 20" 500 (19-11/16") 558.5001B 556.5001B 358M5002SA 358M5002IA 550 (21-5/8") 558.5501B 556.
PAGE 30
TANDEMBOX D height drawer with double gallery Cabinet proﬁle installation 558 400 450 450 500 550 128 192 556 450 500 – 550 500 550 32 32 32 96 128 37 256 416 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") 199 Drawer back Width = opening width minus 87 (3-7/16") Height = 199 (7-13/16") ICW - 87 AL - 24 ICW IC
PAGE 31
D Speciﬁcations Front ﬁxing bracket installation cabinet drawer front 15.5 + overlay 15.5 228 min. 33 min. 9 47.5 min. 47.5 min. + overlay 95.5 32 64 195 min. 128 64 Ø10 x 12* *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear ﬁxing bracket installation drawer back 32 32 199 64 32 8 9 Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
PAGE 32
TANDEMBOX D height drawer – gallery with design element Application Description Space requirements ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Three-dimensional drawer front adjustment ■ Dynamic load capacity of 75 lb and 150 lb ■ Drawer side height 207 (8-1/8") 228 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 5a 6 3 5b 4 2 1 7 NOTE: Parts identiﬁed on right page Assembly aids 32 © 2013 Blum, Inc.
PAGE 33
D Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps 1 cabinet proﬁle nominal length actual cabinet proﬁle length 18" 450 (17-11/16") 558.4501B 556.4501B 358M4502SA 75 lb 150 lb gray 20" 500 (19-11/16") 558.5001B 556.5001B 358M5002SA 22" 550 (21-5/8") 558.5501B 556.5501B 358M5502SA 26" 650 (25-9/16") 556.6501B 359M6502SA 707N 707N 612TH 661.1300.HG 661.1300.
PAGE 34
TANDEMBOX D height drawer – gallery with design element Cabinet proﬁle installation 558 450 500 550 556 450 500 550 650 32 96 128 19 37 256 320 384 416 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") 199 Drawer back Width = opening width minus 87 (3-7/16") Height = 199 (7-13/16") ICW - 87 AL - 24 ICW ICW - 75
PAGE 35
D Speciﬁcations Front ﬁxing bracket installation cabinet drawer front 15.5 + overlay 15.5 228 min. 33 min. 9 47.5 min. 47.5 min. + overlay 95.5 32 195 min. 128 Ø10 x 12* *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear ﬁxing bracket installation drawer back 32 32 199 64 32 8 9 Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
PAGE 36
TANDEMBOX D height drawer – with design element Application Description Space requirements ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Three-dimensional drawer front adjustment ■ Dynamic load capacity of 75 lb and 150 lb ■ Drawer side height 203 (8") 224 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 5 3 4 2 6 1 NOTE: Parts identiﬁed on right page Assembly aids 36 © 2013 Blum, Inc.
PAGE 37
D Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps 1 cabinet proﬁle actual cabinet proﬁle length nominal length 2 drawer proﬁle 75 lb 150 lb 358L2702IA2 270 (10-5/8") 14" 350 (13-3/4") 558.3501B 358L3502IA2 16" 400 (15-3/4") 558.4001B 358L4002IA2 18" 450 (17-11/16") 558.4501B 556.4501B 358L4502IA2 20" 500 (19-11/16") 558.5001B 556.5001B 358L5002IA2 22" 550 (21-5/8") 558.
PAGE 38
TANDEMBOX D height drawer – with design element Cabinet proﬁle installation 558 270 350 400 450 500 550 192 556 450 500 550 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") 199 Drawer back Width = opening width minus 87 (3-7/16") Height = 199 (7-13/16") ICW - 87
PAGE 39
D Speciﬁcations Front ﬁxing bracket installation cabinet drawer front 15.5 224 min. 33 min. 9 15.5 + overlay 47.5 min. 47.5 min. + overlay 112.2 32 191 min. 96 Ø10 x 12* *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear ﬁxing bracket installation Design element dimensions Speciﬁcations for custom design element drawer back A L – 60 100 32 32 199 64 32 8 9 Thickness = 8 mm (+0.3/-0.
PAGE 40
TANDEMBOX D height drawer – with BOXCAP Application Space requirements Description ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Three-dimensional drawer front adjustment ■ Dynamic load capacity of 75 lb and 150 lb ■ Drawer side height 201 (7-15/16") 224 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 4 3 2 5 1 NOTE: Parts identiﬁed on right page Assembly aids 40 © 2013 Blum, Inc.
PAGE 41
D Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps nominal length actual cabinet proﬁle length 11" 270 (10-5/8") 2 drawer proﬁle 1 cabinet proﬁle 75 lb 150 lb stainless steel 558.2701B 358L2702IA2 14" 350 (13-3/4") 558.3501B 358L3502IA2 16" 400 (15-3/4") 558.4001B 358L4002IA2 18" 450 (17-11/16") 558.4501B 556.4501B 358L4502IA2 20" 500 (19-11/16") 558.5001B 556.
PAGE 42
TANDEMBOX D height drawer – with BOXCAP Cabinet proﬁle installation 270 558 350 400 450 500 550 192 450 556 500 550 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") Drawer back Width = opening width minus 87 (3-7/16") 199 Height = 199 (7-13/16") ICW - 87 AL - 24
PAGE 43
D Speciﬁcations Front ﬁxing bracket installation cabinet drawer front 15.5 + overlay 15.5 224 min. 33 min. 9 47.5 min. 47.5 min. + overlay 112.2 32 191 min. 96 Ø10 x 12* *Pre-boring dimensions for INSERTA and EXPANDO only, for screw-on pre-bore Ø2 x 2.5 Rear ﬁxing bracket installation drawer back 32 32 199 64 32 8 9 Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
PAGE 44
TANDEMBOX M height – interior roll-out Application Description Space requirements 136.5 *106 ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Two-dimensional drawer front adjustment ■ Dynamic load capacity of 75 lb and 150 lb ■ Drawer side height 84 (3-5/16") AL = actual cabinet proﬁle length *Minimum opening with handle and 3 (1/8") clearance Components 5 2 1 3 6 4a or 4b 7 NOTE: Parts identiﬁed on right page Assembly aids 44 © 2013 Blum, Inc.
PAGE 45
M Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps 1 cabinet proﬁle actual cabinet proﬁle length nominal length 75 lb 2 drawer proﬁle 150 lb gray stainless steel 11" 270 (10-5/8") 558.2701B 358M2702SA 358M2702IA 14" 350 (13-3/4") 558.3501B 358M3502SA 358M3502IA 16" 400 (15-3/4") 558.4001B 358M4002SA 358M4002IA 18" 450 (17-11/16") 558.4501B 556.
PAGE 46
TANDEMBOX M height – interior roll-out Cabinet proﬁle installation 270 558 350 400 450 500 550 192 450 556 500 550 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") 84 Drawer back Width = opening width minus 87 (3-7/16") Height = 84 (3-5/16") AL - 24 ICW - 87 IC
PAGE 47
M Speciﬁcations Rear ﬁxing bracket installation cabinet drawer back 33 15.5 20 32 84 min. 95.5 103.5 min. 73* 136.5 min. 106* 9 *measurement for use with handle (ZIF.80M5) Cutting front piece Front boring dimensions for interior front handle Using a metal cutting blade, cut front piece to size. drawer front center line X X + 47 Ø25 x 12 61.5 17 min.
PAGE 48
TANDEMBOX D height – interior roll-out with single gallery Description Application Space requirements ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Three-dimensional drawer front adjustment ■ Dynamic load capacity of 75 lb and 150 lb ■ Drawer side height 207 (8-1/8") 228 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 6 3 2 7 1 5 4 NOTE: Parts identiﬁed on right page Assembly aids 48 © 2013 Blum, Inc.
PAGE 49
D Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps 1 cabinet proﬁle actual cabinet proﬁle length nominal length 16" 400 (15-3/4") 2 drawer proﬁle 75 lb 150 lb gray 558.4001B stainless steel 358M4002SA 358M4002IA 18" 450 (17-11/16") 558.4501B 556.4501B 358M4502SA 358M4502IA 20" 500 (19-11/16") 558.5001B 556.5001B 358M5002SA 358M5002IA 22" 550 (21-5/8") 558.5501B 556.
PAGE 50
TANDEMBOX D height – interior roll-out with single gallery Cabinet proﬁle installation 558 400 450 450 500 550 192 556 450 500 – 550 500 550 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") 199 Drawer back Width = opening width minus 87 (3-7/16") Height = 199 (
PAGE 51
D Speciﬁcations Front ﬁxing bracket installation cabinet drawer back 15.5 64 33 min. 95.5 32 32 199 195 min. 228 min. 32 8 9 Cutting front piece Cutting cross rail Using metal cutting blade, cut front piece to size. Using metal cutting blade, cut cross rail to size. X = opening width minus 132 (5-3/16") X = opening width minus 122 (4-13/16") X X Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
PAGE 52
TANDEMBOX D height – interior roll-out with double gallery Description Application Space requirements ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Three-dimensional drawer front adjustment ■ Dynamic load capacity of 75 lb and 150 lb ■ Drawer side height 207 (8-1/8") 228 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 7 4 3 2 8 1 6 5 NOTE: Parts identiﬁed on right page Assembly aids 52 © 2013 Blum, Inc.
PAGE 53
D Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps 1 cabinet proﬁle actual cabinet proﬁle length nominal length 2 drawer proﬁle 75 lb 150 lb gray stainless steel 16" 400 (15-3/4") 558.4001B 358M4002SA 358M4002IA 18" 450 (17-11/16") 558.4501B 556.4501B 358M4502SA 358M4502IA 20" 500 (19-11/16") 558.5001B 556.5001B 358M5002SA 358M5002IA 22" 550 (21-5/8") 558.5501B 556.
PAGE 54
TANDEMBOX D height – interior roll-out with double gallery Cabinet proﬁle installation 558 400 450 500 550 192 556 450 500 550 32 96 128 37 256 320 416 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") 199 Drawer back Width = opening width minus 87 (3-7/16") Height = 199 (7-13/16") ICW - 87 AL - 24 ICW ICW - 75 AL =
PAGE 55
D Speciﬁcations Front ﬁxing bracket installation cabinet drawer back 33 15.5 64 min. 95.5 32 32 199 228 min. 195 min. 32 8 9 Cutting front piece Cutting cross rail Using metal cutting blade, cut front piece to size. Using metal cutting blade, cut cross rail to size. X = opening width minus 132 (5-3/16") X = opening width minus 122 (4-13/16") X X Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
PAGE 56
TANDEMBOX D height – interior roll-out with design element Application Description Space requirements ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Three-dimensional drawer front adjustment ■ Dynamic load capacity of 75 lb and 150 lb ■ Drawer side height 203 (8") 224 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 7 3 4 2 8 1 6 5 NOTE: Parts identiﬁed on right page Assembly aids 56 © 2013 Blum, Inc.
PAGE 57
D Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps 1 actual cabinet proﬁle length nominal length 11" 2 drawer proﬁle cabinet proﬁle 75 lb 150 lb stainless steel 558.2701B 270 (10-5/8") 358L2702IA2 14" 350 (13-3/4") 558.3501B 358L3502IA2 16" 400 (15-3/4") 558.4001B 358L4002IA2 18" 450 (17-11/16") 558.4501B 556.4501B 358L4502IA2 20" 500 (19-11/16") 558.5001B 556.
PAGE 58
TANDEMBOX D height – interior roll-out with design element Cabinet proﬁle installation 558 270 350 400 450 500 550 192 556 450 500 550 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") 199 Drawer back Width = opening width minus 87 (3-7/16") Height = 199 (7-13/16")
PAGE 59
D Speciﬁcations Front ﬁxing bracket installation cabinet drawer back 15.5 64 33 min. 32 112.2 32 199 191 min. 224 min. 32 8 9 Cutting front piece Cutting cross rail Design element dimensions Using metal cutting blade, cut front piece to size. Using metal cutting blade, cut cross rail to size. Speciﬁcations for custom design element X = opening width minus 132 (5-3/16") X = opening width minus 122 (4-13/16") X Thickness = 8 mm (+0.3/-0.
PAGE 60
TANDEMBOX D height – interior roll-out with BOXCAP Application Description Space requirements ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Three-dimensional drawer front adjustment ■ Dynamic load capacity of 75 lb and 150 lb ■ Drawer side height 201 (7-15/16") 224 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components 6 3 2 1 5 4 7 NOTE: Parts identiﬁed on right page Assembly aids 60 © 2013 Blum, Inc.
PAGE 61
D Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps 1 cabinet proﬁle 2 drawer proﬁle nominal length actual cabinet proﬁle length 11" 270 (10-5/8") 558.2701B 358L2702IA2 14" 350 (13-3/4") 558.3501B 358L3502IA2 16" 400 (15-3/4") 558.4001B 18" 450 (17-11/16") 558.4501B 556.4501B 358L4502IA2 20" 500 (19-11/16") 558.5001B 556.5001B 358L5002IA2 22" 550 (21-5/8") 558.5501B 556.
PAGE 62
TANDEMBOX D height – interior roll-out with BOXCAP Cabinet proﬁle installation 558 270 350 400 450 500 550 192 556 450 500 550 600 650 32 32 32 96 128 19 37 256 320 384 416 480 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Cutting dimensions for bottom and back Drawer bottom Width = opening width minus 75 (2-15/16") Length = actual cabinet proﬁle length minus 24 (15/16") 199 Drawer back Width = opening width minus 87 (3-7/16") Height = 199 (7-13/16") ICW - 8
PAGE 63
D Speciﬁcations Front ﬁxing bracket installation cabinet drawer back 15.5 64 33 min. 32 112.2 32 199 224 min. 191 min. 32 8 9 Cutting front piece Cutting cross rail Using metal cutting blade, cut front piece to size. Using metal cutting blade, cut cross rail to size. X = opening width minus 132 (5-3/16") X = opening width minus 122 (4-13/16") X X Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
PAGE 64
TANDEMBOX M height – SPACE CORNER Application Space requirements Description ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Two-dimensional drawer front adjustment ■ Dynamic load capacity of 150 lb 101.5 * AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components SPACE CORNER 3a 3b 1 3c 2 Assembly aids 64 © 2013 Blum, Inc. page 82 - 87 Accessories Subject to technical modiﬁcations without notice.
PAGE 65
M Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps nominal length actual cabinet proﬁle length 1 cabinet proﬁle 2 drawer proﬁle 150 lb gray stainless steel 24" 600 (23-5/8") 556.6001B 359M6002SA 359M6002IA 26" 650 (25-9/16") 556.6501B 359M6502SA 359M6502IA 707N 612TH 612TH Installation wood screw Installation system screw 661.1300.
PAGE 66
TANDEMBOX M height – SPACE CORNER Cabinet proﬁle installation 600 650 32 32 32 96 32 67 256 82 320 384 100 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Drawer back cutting dimensions Drawer bottom cutting dimensions Drawer back Bottom width = opening width minus 75 (2-15/16") Bottom length = bottom width divided by two, plus actual cabinet proﬁle length minus 4 (3/16") left right actual length minus 4 84 X bottom length 45° 45° bottom width Calc
PAGE 67
M Speciﬁcations SPACE CORNER preparation for ORGA-LINE In order to use ORGA-LINE in an M height SPACE CORNER, the drawer must be ﬁtted with two vertical wooden cross dividers that are spaced 474 (18-11/16") apart. 45° 4 16 back panel 47 64 300 ICW minus 45 front panel 14 R10.5 55.8° 8.8° 20.3 Front ﬁxing bracket installation Corner rear ﬁxing bracket installation EXPANDO 9 Ø10 x 12 20 32 84 min. min. 101.5 68.5 33 min. 95.5 9 + overlay 47.
PAGE 68
TANDEMBOX D height single gallery – SPACE CORNER Application Description Space requirements 228* ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Three-dimensional drawer front adjustment ■ Dynamic load capacity of 150 lb AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components SPACE CORNER 6a 4a 5 3 6b 2 1 4c 4b Assemblyaids aids Assembly 68 © 2013 Blum, Inc.
PAGE 69
D Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps 1 cabinet proﬁle actual cabinet proﬁle length nominal length 2 drawer proﬁle 150 lb gray stainless steel 24" 600 (23-5/8") 556.6001B 359M6002SA 359M6002IA 26" 650 (25-9/16") 556.6501B 359M6502SA 359M6502IA 707N 612TH 612TH Installation wood screw 661.1300.
PAGE 70
TANDEMBOX D height single gallery – SPACE CORNER Cabinet proﬁle installation 600 650 32 32 32 96 32 67 256 82 320 384 100 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Drawer back cutting dimensions Drawer bottom cutting dimensions Drawer back Bottom width = opening width minus 75 (2-15/16") Bottom length = bottom width divided by two, plus actual cabinet proﬁle length minus 4 (3/16") left right actual length minus 4 199 X bottom length 45° 45° bo
PAGE 71
D Speciﬁcations Front ﬁxing bracket installation Corner rear ﬁxing bracket installation EXPANDO 9 32 8 9 32 199 64 228 min. 195 min. 33 min. 32 95.5 9 + overlay 47.5 min. 32 128 Ø10 x 12 30 + overlay 30 Cabinet measurements A minimum clearance of 3 (1/8") must be maintained between the opening path of the drawer front of the SPACE CORNER and the edge of the adjacent drawer front (including the drawer handle).
PAGE 72
TANDEMBOX D height – SPACE CORNER Application Description Space requirements 228* ■ Full extension drawer system with BLUMOTION ■ TANDEM smooth running mechanism ■ Three-dimensional drawer front adjustment ■ Drawer side can be used with BOXCAP or design element ■ Dynamic load capacity of 150 lb AL = actual cabinet proﬁle length *Minimum opening height based on 3 (1/8") clearance Components SPACE CORNER 5 3 and 4 or 5 6a 3 and 4 or 5 1 6c 2 6b Assemblyaids aids Assembly 72 © 2013 Blum, Inc.
PAGE 73
D Required parts Cabinet and drawer proﬁle sets Sets include: ■ Left and right proﬁles ■ Drawer proﬁle includes color coordinated cover caps 1 cabinet proﬁle 2 drawer proﬁle nominal length actual cabinet proﬁle length 24" 600 (23-5/8") 556.6001B 359L6002IA2 26" 650 (25-9/16") 556.
PAGE 74
TANDEMBOX D height – SPACE CORNER Cabinet proﬁle installation 600 650 32 32 32 96 32 67 256 82 320 384 100 512 NOTE: Recommended screw locations in orange (system screws or #7 wood screws) Drawer back cutting dimensions Drawer bottom cutting dimensions Drawer back Bottom width = opening width minus 75 (2-15/16") Bottom length = bottom width divided by two, plus actual cabinet proﬁle length minus 4 (3/16") left right actual length minus 4 199 X bottom length 45° 45° bottom width Cal
PAGE 75
D Speciﬁcations Front ﬁxing bracket installation Corner rear ﬁxing bracket installation EXPANDO 9 9 64 199 32 32 15.5 33 min. 47.5 9 30 + overlay 112.2 47.5 min. + overlay 32 128 195 min. 228 min. 32 8 Ø10 x 12 Cabinet measurements A minimum clearance of 3 (1/8") must be maintained between the opening path of the drawer front of the SPACE CORNER and the edge of the adjacent drawer front (including the drawer handle).
PAGE 76
TANDEMBOX wraparound sink drawer Application Description ■ ■ ■ ■ Full extension drawer system with BLUMOTION TANDEM smooth running mechanism Two-dimensional drawer front adjustment Dynamic load capacity of 75 lb and 150 lb M height D height with single gallery A B 1 1 2 3 2 3 NOTE: Parts identiﬁed on right page NOTE: Parts identiﬁed on right page D height with design element D height with BOXCAP C D 1 1 2 2 3 3 NOTE: Parts identiﬁed on right page Assemblyaids aids Assembly 76 © 2013
PAGE 77
Required parts Required outside drawer components A B M height required components and speciﬁcations, see page 16 C D D height with BOXCAP required components and speciﬁcations, see page 40 D height with design element required components and speciﬁcations, see page 36 D height with single gallery required components and speciﬁcations, see page 24 Inside drawer proﬁle set Set includes: ■ Left and right inside drawer proﬁle ■ Drawer height 84 (3-5/16") ■ Colors: gray and stainless steel 1 NOTE: Add
PAGE 78
TANDEMBOX dual sink drawer Application Description ■ ■ ■ ■ Full extension drawer system with BLUMOTION TANDEM smooth running mechanism Three-dimensional drawer front adjustment Dynamic load capacity of 75 lb and 150 lb M height D height with single gallery A B NOTE: Parts identiﬁed on right page NOTE: Parts identiﬁed on right page D height with design element D height with BOXCAP C D NOTE: Parts identiﬁed on right page Assemblyaids aids Assembly 78 © 2013 Blum, Inc.
PAGE 79
Required parts Required outside drawer components (2 required per drawer) A B C D height with single gallery required components and speciﬁcations, see page 24 M height required components and speciﬁcations, see page 16 D D height with BOXCAP required components and speciﬁcations, see page 40 D height with design element required components and speciﬁcations, see page 36 Cutting dimensions for bottom and back B Drawer bottom Minimum width = 43 (1-11/16"") each Length = actual cabinet proﬁle length m
PAGE 80
TANDEMBOX waste/recycle set with SERVO-DRIVE Description Application Basic components ■ Pre-assembled bottom mount solution ■ TANDEMBOX heavy duty full extension drawer system ■ For 12", 15" and 18" minimum opening widths ■ For face frame and panel applications ■ Three-dimensional drawer front adjustment ■ Maximum 6 (1/4") cabinet bottom recess ■ TANDEM smooth running action ■ 175 lb static, 150 lb dynamic load rating ■ SERVO-DRIVE touch-to-open feature NOTE: Bins not included Components TANDEMBOX waste
PAGE 81
Speciﬁcations Drawer and cabinet specifications Front view Important 6 (1/4") minimum top clearance opening width Bin width and height must be considered when designing your cabinet (see the diagram on the left). need bin height, not bin ht with Minimum inside cabinet depth drawer.
PAGE 82
Assembly aids Cabinet proﬁle template ■ Used for pre-boring holes for TANDEM, TANDEMBOX plus BLUMOTION and TANDEMBOX drawer runners ■ Can also be used to pre-bore AVENTOS locating pins and pre-boring for hinge mounting plates Part no. Cabinet proﬁle template 65.1000.01 Replacement template 65.1001.01 Ø2.5 mm drill bit DB-2.5mm Components Cabinet proﬁle template includes: 1 3 4 1 Rail, 1 meter long (qty 1) 2 Replacement template (qty 4) 3 Ø2.
PAGE 83
a Assembly aids Universal individual template ■ Used for pre-boring holes for TANDEM, TANDEMBOX plus BLUMOTION and TANDEMBOX drawer runners ■ Can also be use to pre-bore for AVENTOS locating pins and pre-boring for hinge mounting plates ■ Calibrated scale for accurate setting Set includes: ■ Universal individual template ■ Ø2.5 mm and Ø5 mm stop collars Part no. Universal individual template 65.1051.01 Ø2.5 mm drill bit DB-2.
PAGE 84
Assembly aids Universal boring template ■ Used for boring drawer fronts, locates all ﬁxing positions ■ Ø5 mm and Ø10 mm stop collars included ■ Ø10 mm marking pin included Part no. Universal boring template ZML.0040.
PAGE 85
a Assembly aids BOXFIX E-T Using BOXFIX E-T you can manually assemble TANDEMBOX easier than ever. Its easy setup and comfortable work height all contribute to a more efﬁcient assembly of TANDEMBOX drawers. ■ For all TANDEMBOX heights and lengths ■ For cabinet widths 250 to 1200 (9-13/16" to 47-1/4") ■ For cabinet back heights up to 250 (9-13/16") Part no. ZMM.0350 BOXFIX E-T BOXFIX P Using the new BOXFIX P you can assemble TANDEMBOX faster than ever.
PAGE 86
Machines MINIPRESS P - Deluxe boring and insertion machine Features: ■ Front adjustable boring distance with digital counter ■ Pneumatic hold-down clamps ■ Improved boring depth adjustment ■ Improved positioning stops (qty 4) ■ Tool kit included ■ Dust collection attachment ■ Accepts optional 7 or 8 spindle heads Part no. Single phase - 220V power Laser center line optional M53.1053.US Three phase - 220V power Laser center line optional M53.1004.
PAGE 87
a Machine accessories 9 spindle head ■ ■ ■ ■ 9 spindle head for use with MINIPRESS/MINIDRILL Bores nine holes spaced 32 mm apart, parallel to the fence New feature – quick-disconnect chucks Requires retroﬁt set M30.1313.UM for machines produced in 2009 or prior Part no. MZK.190S 9 spindle head M30.
PAGE 88
Accessories TANDEMBOX cover caps ■ ■ ■ ■ For use with TANDEMBOX drawers Non-handed, symmetrical design Colors: gray and silver Custom logo printing available Part no. Front stabilization bracket application Space requirements ZAA.532C Silver cover cap ZAA.5329 Front boring dimensions 39.5 47.5 min.
PAGE 89
a Accessories Lateral stabilizer set Set includes: 1 Linkage rod, 1076 (42-3/8") cut to size 2 Pinion gears (qty 2) 1 3 Rear brackets, left and right 3 4 Gear racks, left and right 2 4 Drawer length Linkage rod speciﬁcations Part no. 500 (20") ZST.500BA 550 (22") ZST.
PAGE 90
Accessories METAFILE set Set makes one standard hanging ﬁle. Recommended use in combination with B height drawer. 4 6 Set includes: 1 Steel hanging rails (qty 4) – 3 x 13 x 550 (1/8" x 1/2" x 21-5/8") ■ 3 ■ 2 Rail support brackets (qty 4) ■ 3 Rail support covers (qty 4) ■ 4 Glide proﬁles (qty 4) – length 550 (21-5/8") ■ 5 Flathead wood screws (qty 8) – #6 x 19 (3/4") ■ 6 Lateral brackets (qty 4) 4 2 1 Part no. ZRM.5500 METAFILE set 5 Replacement parts Rail support covers ZRM.
PAGE 91
a Accessories Bumpers POZI DRIVER and bits ■ Cushions door closing ■ Clear with a self-adhesive back A POZI screwdriver (different from Phillips) is the most crucial tool you can use to assure that full torque is applied to all Blum mounting screws. POZI screws can be identiﬁed by the distinctive “tick” marks located in the center of the screw head recess. Phillips POZI tick marks Part no. #2 POZI DRIVER POZI DRIVER Part no. 1/4" Magnetic bit holder BIT HOLDER Ø6 (1/4") x 1.
PAGE 92
Additional features ORGA-LINE In the kitchen ORGA-LINE adjustable organizational systems and innovative accessories help make access to storage goods, quick and easy. ORGA-LINE is not only functional, but can also match the look and design of your drawers. The right design and combination of material, color and shape creates a harmonious look – in the kitchen and other living areas, and for nearly any application. For ordering information please visit blum.com to download the ORGA-LINE brochure (LIT.
PAGE 93
i Testing standards Blum's testing standards Blum, Inc. is ISO 9001 certiﬁed which means that you are assured of consistent quality in every Blum product. All Blum runners must pass these tests without showing a measurable reduction in performance or deviation in adjustment position. Testing standards vary between products and applications. All Blum runners meet or exceed ANSI/BHMA 156.9 grade 1 requirements. Contact your local Blum representative for more details.
PAGE 96
Part number index Part no. Page no. 65.1106 82 356M55B7SAB 80 356M55B7SAD 80 356M55B7SAF 80 358L2702IA2 37, 41, 57, 61 358L3502IA2 37, 41, 57, 61 358L4002IA2 37, 41, 57, 61 358L4502IA2 37, 41, 57, 61 358L5002IA2 37, 41, 57, 61 358L5502IA2 37, 41, 57, 61 358M2702IA 17, 45 358M2702SA 17, 45 358M3502IA 17, 45 358M3502SA 17, 45 358M4002IA 358M4002SA 96 17, 21, 25, 29, 45, 49, 53 17, 21, 25, 29, 45, 49, 53 359M6002IA 17, 21, 25, 45, 49, 65, 69 M01.ZB05.D3 91 M01.ZB10.
PAGE 97
i Part no. Page no. Z37L340I.D 41, 61 ZSF.3502.02 13, 17, 21, 25, 29, 33 Z37L390I.D 41, 61 ZSF.3902 13, 17, 21, 25, 29, 33 Z37L440I.D 41, 61 ZSF.5220 37, 41 Z37L490I.D 41, 61 ZSF.532E 37, 41 Z37L540I.D 41, 61 ZSF.345E.D1 69, 73 Z37L590I.D 41, 61, 73 ZST.500BA 89 Z37L640I.D 41, 61, 73 ZST.550BA 89 Z96.10E1 88 ZAA.5329 88 ZAA.532C 88 ZIF.71M0 L&R 45 ZIF.80M0.01 45 ZIF.80M5 45 ZIF.80M7 45 ZIF.82D0.01 57, 61 ZML.0040.01 84 ZML.3600 84 ZML3580.01 84 ZMM.
PAGE 98
Blum, Inc.
PAGE 99
Why choose Blum Blum, Inc. is a leading manufacturer of functional hardware for the kitchen cabinet and commercial casework industries specializing in lift systems, concealed hinges and drawer runner systems. Virtually all of the hardware needed to assemble and make cabinets functional is available within the wide range of quality Blum products. Blum supports the U.S.
PAGE 100
Blum, Inc. 7733 Old Plank Rd. Stanley, NC 28164 800-438-6788 blum.com Please visit blum.com for information on other Blum products. LIT.TBX1000.12.13 © 2013 Blum, Inc.