Product Literature

AVENTOS

Inset Applications

Planning information for cabinet-within-cabinet

In this illustration the 37 setback for the

Ø5 x 5 locating pin holes is measured

from the back of the door (or front edge

of the interior cabinet). The Y dimension

is determined by the selected

AVENTOS lift system.

NOTE: Mounting plate position varies

based on block-out thickness used at

top of cabinet

This illustration shows how the interior cabinet is simply an overlay cabinet that is set

back the thickness of the door front and bumper. This also provides a stopping point for

the door.

NOTE: The top and bottom panels of the inner cabinet are optional, but their intended

thicknesses are needed for calculating the Y dimension for the lift mechanism

Face Frame Application

The illustrations below show the idea of building a cabinet within a cabinet to obtain the needed space required for AVENTOS. By

either building a smaller cabinet within or adding panels to the outside of a cabinet, you have made it possible to simulate the look

of an inset cabinet.

Frameless inset application

When it comes to inset cabinets and AVENTOS, there are

many ways to accomplish this application. Below is an option

that can be used for both face frame and frameless cabinets

alike.