Product Literature

AVENTOS HL Assembly

AVENTOS

Attaching AVENTOS HL doors

Attach the door using the CLIP mechanism to the arm assembly.

Attaching the arm assembly

Find the right and left arm assemblies and match them to the correct

side of the cabinet.

Attach the arm assembly to the lift mechanism as shown

Lift up on the arm assembly to lock into place

Attaching the stabilizer rod

Cut the stabilizer rod to ﬁt the cabinet. Length = interior cabinet width minus 129 (5-1/16").

After cutting the rod to size follow steps 1, 2, and 3 below.

1 2 3

Slide the stabilizer arm cover caps onto the rod

Attach the stabilizer rod to spring loaded arm assembly

Slide stabilizer arm cover caps over rod on each end

1 2

Warning: Risk of injury by spring-loaded arm assembly!

Removing the arm assembly

Insert screw driver behind notch in locking cam and pry

outward

Remove arm assembly as shown

▬ Do not push telescopic arm down

▬ Remove telescopic arm from mechanism before installing cabinet