Product Literature

Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.
9
MOVENTO
Runner mounting specifications
Side view Runner close-up
NOTE: Elongated holes are for ±4.5 (3/16")
depth adjustment only. Additional screws
must be used to secure the runner to the
cabinet.
NOTE: The orange dots indicate fixing screw locations required to meet specified load ratings.
NOTE: If using 15/32" or 1/2" drawer thickness without T59.K010M, subtract 3 (1/8") from setback and screw locations.
MOVENTO
Drawer
length
Inside cabinet depth with rear attachment
Runner
length
Screw locations for frameless cabinets
Maximum Minimum
AB
763H5330S
533 (21") 599 (23-19/32") 557 (21-15/16") 548 (21-9/16") 261 (10-9/32") 517 (20-11/32")
763H4570S
457 (18") 522 (20-9/16") 480 (18-29/32") 471 (18-17/32") 261 (10-9/32") 453 (17-27/32")
763H3810S
381 (15") 446 (17-9/16") 404 (15-29/32") 395 (15-9/16") 165 (6-1/2") 357 (14-1/16")
763H3050S
305 (12") 370 (14-9/16") 328 (12-29/32")
319 (12-9/16")
165 (6-1/2") 261 (10-9/32")
Drawer back preparation
Rear view
Drawer box specifications
Front view
NOTE: Drawer side material thickness may vary. Accurate measurement of drawer side
material thickness should be used when calculating outside drawer width using the table
below. Inside drawer width must equal opening width minus 42 (1-21/32") for MOVENTO
runners to align and function optimally.
Calculating outside drawer width
For drawer side thickness
16 (5/8") 15 (19/32") 13 (1/2") 12 (15/32")
Deduct from opening width
10 (13/32") 12 (15/32") 16 (5/8") 18 (23/32")
Example: For 21" opening width and a 5/8" thick drawer, 21" minus 13/32" = 20-19/32" drawer width
38 (1-1/2")
26 (1-1/32")
20.5 (13/16")
9 (11/32") Typical
7 (9/32")
34 (1-11/32")
32 (1-1/4")
7 (9/32")
11 (7/16")
Ø6 x 10
Bore for hook
50 (1-15/16") Minimum rear notch
13 (1/2")
Drawer side thickness
16 (5/8")
13 (1/2")
Bottom recess
16 (5/8")
Bottom clearance
38
(1-1/2")
Opening width
Opening height
Opening width minus 42 (1-21/32")
21 (13/16")
Outside drawer width
7 (9/32")
Minimum top
clearance
Maximum
drawer height =
opening minus
23 (29/32")
Drawer and Cabinet Specifications
606N or 606P
Screws
or
662.1150.HG
Maximum drawer thickness 16 (5/8")
Lengths available 12" - 21"
Static load capacity 125 lb
Rear mounting bracket
Front view
NOTE:
For frame applications, use a
minimum of three screws per bracket
12
Face frame rail
Face frame stile
16 32
14 (9/16")
(1-1/4")
(5/8")
(1/8")
3
21
(13/16")
(15/32")
Rear
mounting
bracket
10 (13/32")
A
B
9 (11/32")
32 (1-1/4")
37 (1-15/32")
295.3750.02
606N or 606P
Runner length
Inside cabinet depth
3 (1/8") Setback
Frameless and
face frame
Face frame
only